Fror Shielded Flameproof Cable FROHH2R 2X1.5 mmq


9X9 ED095R010024

Fror Shielded Flameproof cable FROHH2R 2X1.5 sq mm with the following characteristics:

 

  • Diameter: 7.1 mm
  • Conductor: red copper, flexible formation, class 5 Insulation: PVC, TI2 quality
  • Core wrapping: polyester tape
  • Screen 1: aluminum/polyester tape
  • Screen 2: red copper wire braid
  • Sheathing: PVC, TM2 quality
  • Color: gray
  • Rated voltage: 450/750V

     

Sale by the meter.

The producers of our cables are:

  • Baldassari cavi
  • Icel
  • La Triveneta
  • Prysmian
The delivery of the cable from one manufacturer rather than another is dictated by the availability of the moment. All our cables comply with the relevant legal regulations.  
The right of withdrawal does not apply to this product as the cables are cut according to your personal specifications.
Request info about this product

Fror Shielded Flameproof Cable FROHH2R 2X1.5 mmq

€1.01
€1.01

Fror Shielded Flameproof Cable FROHH2R 2X1.5 mmq

€1.01
Tax included
klarna Pay in installments with Klarna
qty

Fror Shielded Flameproof Cable FROHH2R 2X1.5 mmq

€1.01

Buy it within and receive it from Wednesday, 15 May
Two-year warranty
Secure Payment

Power cable suitable for fixed installation in places with fire hazards such as fairgrounds, civil, commercial, and public entertainment buildings; in industrial construction limited to laying in pipes and ducts. Cable with rated voltage 300/500 V is suitable only for signaling and control circuits. Suitable when a special degree of protection against electrostatic (aluminum/polyester tape) and electromagnetic (copper braid) interference is required. Can be installed indoors in normal or humid environments and temporarily outdoors. Underground installation is not allowed.


 

Features:

  • Maximum operating temperature: 70°C
  • Minimum operating temperature: -15°C (in the absence of mechanical stress)
  • Maximum short circuit temperature: 160°C
  • Shield transfer impedance: max 100 m /m (100 KHz to 30 MHz)
  • Good resistance to mechanical stress and chemical agents
  • Good flexibility and behavior at low temperatures
  • Minimum laying temperature: 0°C
  • Recommended minimum bending radius: 8 times the cable diameter
  • Maximum recommended tensile stress: 50 N/mm2 of copper cross section

Data sheet

Colour:
Grey
Type:
FROHH2R
Cross-Section:
1.5mmq
With yellow/green:
No
Number of cables:
2