ABB Motor circuit breaker MS116 1.60-2.50A EP 087 9


ABB EP 087 9 4013614320309

Abb circuit breaker, MS116 series, with the following characteristics:

  • Rated service short-circuit capacity (230 Vac) 50 kA
  • Rated extreme short-circuit capacity (230 Vac) 50 kA
  • Rated instantaneous short-circuit current setting 31.3A
  • Setting range 1.6 ... 2.5A
  • Rated operating voltage Main circuit 690 Vac - Main circuit 440 Vdc
  • Rated impulse withstand voltage (Uimp) Main circuit 6 kV
  • Rated insulation voltage (Ui) 690 V
  • 3 poles
  • 2.5 modules
Request info about this product

ABB Motor circuit breaker MS116 1.60-2.50A EP 087 9

€58.83
€58.83

ABB Motor circuit breaker MS116 1.60-2.50A EP 087 9

€58.83
Tax included
klarna Pay in installments with Klarna
qty

ABB Motor circuit breaker MS116 1.60-2.50A EP 087 9

€58.83

Buy it within and receive it from Tuesday, 28 May
Two-year warranty
Secure Payment
Easy return within 14 days

The motor protection switch is installed on the cable that supplies power to the motor and, when the motor stops due to a mechanical effect or (in three-phase systems) because a phase is missing, it detects an excessive absorption and automatically cuts off the electrical energy, thus safeguarding the integrity of the motor.

Features:

  • Abb Series
  • Rated service short-circuit capacity (230 Vac) 50 kA
  • Rated extreme short-circuit capacity (230 Vac) 50 kA
  • Rated instantaneous short-circuit current setting 31.3A
  • Setting range 1.6 ... 2.5A
  • Rated operating power AC-3 (Pe) (400 V) Three-phase 0.75 kW
  • Rated operating current AC-3e (Pe) (400V) Three-phase 0.75 kW
  • Nominal Operating Voltage Main Circuit 690 Vac - Main Circuit 440 Vdc
  • Nominal Operating Current 2.5A
  • Nominal Operating Current AC-3 2.5A
  • Main Circuit Rated Frequency 50 Hz/60 Hz
  • Rated impulse withstand voltage (Uimp) Main circuit 6 kV
  • Rated insulation voltage (Ui) 690 V
  • Power Loss at Rated Operating Conditions per Pole 0.7W
  • 3 poles
  • 2.5 modules
  • Degree of protection Housing IP20 - Main Circuit Terminals IP10
  • Pollution degree 3
  • Main Circuit tightening torque 0.8 ...1.2 Nm
  • Actuator type Rotating handle
  • Contact position indication ON / OFF
  • Ambient temperature In operation In operation -25 ... +50 °C - In stock -50 ... +80 °C
  • Conventional free air thermal current (Ith) Main circuit 2.5A
  • Width 45 mm
  • Height 90 mm
  • Depth 85.6 mm
  • Net weight 0.265 kg
  • Electrical life 100000 cycles
  • Mechanical life 100000 cycles
  • Type of terminal Screw Terminals
  • Cable cross-sections - main circuit Flexible 1/2x 0.75 ... 2.5 mm² - Rigid 1/2x 1 ... 4 mm² - Rigid
  • Stripping length main circuit cable 9 mm
  • Recommended screwdriver Pozidriv 2
  • Mounting position Position 1 to 6
  • DIN rail mounting
  • TH35-15 (mounting rail 35 x 15 mm) acc. to IEC 60715
  • TH35-7.5 (35 x 7.5 mm mounting rail) acc. to IEC 60715
  • Amperage UL/CSA 2,5A
  • Maximum permissible operating altitude 2000 m
  • Shock resistance acc. toIEC 60068-2-27 11 ms impulse 25 g
  • Vibration resistance acc. toIEC 60068-2-6 - 5g / 3... 150 Hz

Data sheet

Type:
Motor protection
Modules:
2.5
Poles:
3P
Power:
50KA
Amps:
1.60-2.50 A