Giacomini thermo-electric actuator with microswitch 230V

Giacomini's thermo-electric actuator is designed to ensure optimal room temperature control on thermostatic valves, manifolds and zone valves. With limit microswitch, this version is normally closed (N.C.) and powered at 230V, combining energy efficiency, quiet operation and long life due to the absence of mechanical parts subject to wear:
-
Power supply: 230V, frequency 50 Hz, 4-core cable with limit switch, length 1 metre
-
Voltage-free status: Normally closed (N.C.)
-
Microswitch: Normally open with valve closed, for versions with limit switches
-
Connection: Quick-connect system for standard Giacomini valves and manifolds
-
Mechanical indicator: Actuator position display
-
Linear motion: Slow closing to eliminate water hammering
-
Power consumption: Low power consumption with maximum power 2.5W

Tax included
Giacomini thermo-electric actuator with microswitch 230V
The Giacomini R473MX221 thermo-electric actuator is designed to provide optimum room temperature control on thermostatic valves, manifolds and zone valves. Equipped with a limit microswitch and featuring quiet operation and low power consumption, this version is normally closed (N.C.) and powered at 230V.
Advantages
- Totally silent: No noise during operation.
- Long life: Free of wear mechanisms, ensuring maximum reliability.
- Energy efficiency: Low current consumption to reduce energy waste.
- Easy installation: Quick-connect system for standard Giacomini valves and manifolds.
- High protection: IP40 grade and Class II insulation against direct contact
Applications
- Distribution manifolds for heating systems
- Thermostat valves for radiators
- Fan coil valves
- Room temperature control in residential and commercial systems
Technical Characteristics
Specifications | Details |
---|---|
Sensor | New electrothermal sensor with reduced power consumption |
Connection | Quick-connect for standard Giacomini valves and/or manifolds |
Position Display | Mechanical position indicator |
Motion | Linear |
Actuator Useful Stroke | 2.4 mm |
Degrees of Pollution | II |
Nominal Pulse Voltage | 4 kV |
Degree of Protection | IP40 |
Direct Contact Protection | Double Insulation (Class II) |
Operating Environment Temperature Range | -5÷50 °C |
Storage Environment Temperature Range | -20÷65 °C |
Maximum Surface Temperature Mounting | 90 °C |
Enclosure Material | Self-extinguishing PBT V0-UL94 |
Power Cable | H03 VV-F; usable length 1 m |
Power Cable Section | 2 x 0.50 mm² |
Opening and Closing Time (at 20 °C) | 6 minutes |
Voltage Absent State | Normally Closed (N.C.) |
Microswitch | Normally open with valve closed (R473M versions only) |
Power Consumption | 2.5 Watts |
Max Inrush Current | <0,25 A |
Absorbed Current after 12 Minutes | <0,015 A |
Resistance | 6300 ± 1800 |
Compliance | Product complies with the requirements of the EMC and B.T. Directives. |
Data sheet
- Type: Zone valves, diverter valves, actuators