Kit Came automation sliding gate 400Kg 230V 001U2923
Automation kit for sliding gate Came, composed of:
- 1 gearmotor for sliding gate up to 400KG 230V DC (BX704AGS)
- 1 double-frequency grey remote control (TOPD4FKS)
- 1 antenna tuned for flashing, working frequency 433.92 Mhz (001TOP-A433N)
- 1 radio frequency card plug-in 433.920 MHz (001AF43S)
- 1 pair of photocells 12/24V DC 10 meters Max (001DIR10)
- 1 LED signal flasher (001KLED)
- 1 memory roll
- 1 signaling sign
Kit Came automation sliding gate 400Kg 230V 001U2923
Tax included
Kit components:
1 gearmotor for sliding gates up to 400KG 230V DC (BX704AGS): Automation complete with electronic board, built-in radio decoder, device for movement control and obstacle detection and mechanical limit switches for sliding gates up to 400 Kg and maximum length 14 metres. It replaces the previous model BX-74. In addition to the usual control and safety functions, the new 230V BX series electronics offer a number of special features that allow total control of the automation and optimisation of the service.
- Stop of the gate directly from the radio transmitter for movement control always at hand.
- Partial opening to allow limited opening for pedestrian passage.
- Safety even when the gate is stopped thanks to the special electronic circuit that cancels all commands if an obstacle is detected by the safety devices.
1 grey dual frequency remote control (TOPD4FKS): This 4-channel transmitter is used to control various CAME automations, gates, garage doors and awnings, from the same device using 2 different working frequencies, 433.92 MHz and 868.35 MHz. With its innovative design, it simplifies everyday life and works as a fixed code for greater security.
1 antenna tuned for flashing lights, working frequency 433.92 Mhz (001TOP-A433N)
1 plug-in radio frequency card 433.920 MHz (001AF43S): Came plug-in radio frequency card. It operates on a frequency of 433.920 MHz, with a power supply of 12 V / 24 V (AC / DC). Number of channels 2. Came AF43S is a receiver that will allow you to manage your automations and motorizations in a reliable way. It is easy to program thanks to mixed programming. Ideal for residential use. It has 2 channels and works with all CAME TOP432 / TOP434 remote controls and with CAME TAM432 (by removing the jumper on the receiver).
1 pair of photocells 12/24V DC 10 metres Max (001DIR10): Pair of Came infrared photocells for outdoor use, wall-mounted, maximum range 10 metres. Suitable for use in outdoor environments (outdoors and in bad weather).
Features:
- Power supply 12 - 24V AC/DC
- Relay capacity at 24 V (mA) 500
- Current consumption at 24 V AC (mA) 60
- Max relay contacts capacity at 24 V (A) 0.5
- Degree of protection: IP54
- Material: ABS + polycarbonate
- Dimensions: 46x108x23 mm
1 LED signalling flasher (001KLED): LED signalling flasher for Came gates, power supply 120/230V in AC. Suitable for use in outdoor environments (outdoors and in bad weather).
Features:
- Power supply 120-230V
- Absorption 2W
- Prearranged for antenna 001TOP-A433N
- LED operation
- Degree of protection IP54
- Dimensions: 170x130x76
- Intermittence 50
- Operating temperature -20°C/+50°C
- Material ABS polycarbonate
1 memory roll
1 warning sign
Data sheet
- KIT:
- Kit Gates
- Type:
- Engines Gates
- Model:
- Sliding gate