Notifier interface module 5 inputs 5 outputs MCX-55ME

Notifier
Notifier
NOT MCX-55ME

Notifier interface module 5 inputs 5 outputs, each input can be connected on two- or four-conductor supervised line, each output has a potential-free changeover contact.

 

Compatible with both CLIP and Advanced control panels.

Offer expires in
Do you have questions about this product or did you not find what you were looking for? Ask us!
Notifier interface module 5 inputs 5 outputs MCX-55ME
€319.86
€310.26
€310.26

Lowest price in 30 days:
€319.86
Save 3%
€310.26
Tax included
Calculate shipping cost
Offer expires in
Items Available: 12
Further availability of the manufacturer
€310.26

Buy it within and receive it from Monday, 2 February
Two-year warranty
Easy return within 14 days
Purchase with tax breaks

Are you a professional ?

Request access to

Trustpilot

Frequently bought together

The MCX-55ME board can be used with all NOTIFIER addressed control panels with both CLIP (1-99) and Advanced (1-159) protocols. It consists of 5 input modules and 5 output modules with potential-free contact output relays. The dimensions of the board also make it compatible with standard 19 racks of height 6 U.S. Thus, the enclosure is not supplied, which can be selected by the installer from among the many commercially available sizes.

 

Advantages:

  • All modules on the board are powered directly from the 2-wire communication loop with the control panel
  • To make wiring, maintenance or eventual replacement quick, removable terminals are provided on the terminals, divided by function
  • The board is CPR certified according to EN.54.18
  • The module uses 10 consecutive addresses of the 99 available per line, addresses that can be programmed by dip-switch
  • Unused inputs or outputs can be excluded
  • CPR certified in accordance with EN 54-18
  • Power supply 15-30Vdc
  • Quiescent current 4mA with LED flashing
  • Operating temperature from 0°C to +50°C
  • Relative humidity up to 93%

     

Input modules:

  • The input of each module, suitable for detecting the closing of a normally open contact, is provided for either a 2-wire type connection or a 4-wire type loop connection. The 2-wire input connection requires the use of an end-of-line resistor supplied as standard. The external 4-wire loop connection (LOOP) enables alarm detection even if there is an interruption in the loop

     

Output modules:

  • The output of each relay module consists of a potential-free contact with the following characteristics: ? Resistive load = 2 A @ 30 VDC; ? Inductive load = 0.6 A @ 30 Vdc

     

Operation:

  • The board uses 10 consecutive addresses of the control panel. Depending on the control panel to which the module is connected, the value of permissible addresses can be: 01-99 for control panels with CLIP protocol or 01-159 for those with Advanced protocol. The initial address of the board is selectable using Dip-Switch SW-2 and corresponds to the DECLINES of the full address on the Central Unit. The individual internal modules correspond to the UNITS respectively (beginning +0 to +9) Addresses greater than 99 are valid only for control panels with Advanced protocol Note: Since the control panel does not query address 00, with the selection of the address of the first ten, the first module is not recognized

     

Individual module exclusion:

  • Lesclusion of an individual module is achieved by setting the relevant dip-switch SW1 to OFF, this allows the address of the EXCLUDED module to be used for other devices. (in CLIP mode only)

     

Connection to the central unit:

  • The 2-wire line coming from the central unit must be connected to the 4-terminal LOOP terminal block. To facilitate relaying to other devices, terminals 1-2 and 3-4 are connected together

     

Features:

  • Dimensions: The board has dimensions suitable for a standard 19 rack 6 U.S. height 233 mm x 70 mm, including terminal block
  • Mounting hole spacing: 218 mm x 37.5 mm
  • Operating temperature: 0/49 °C
  • Relative humidity: 0 ? 93 % (without condensation)
  • Power supply: directly from the line addressed by the Central Unit

There are no reviews

Data sheet

Type:
Indexed Modules
Contact details of the manufacturer and the responsible person

Other products with same features