Input:

• Single-phase line
• Single-phase reference voltage: 230V
• Operating limit range: 196...264V
• Voltage circuit self-consumption (max. voltage): 9.7VA (0.5W) @ 264V
• Reference frequency fn: 50-60Hz
• Allowable variation: 47...63Hz
• Base current, Ib: 5A
• Maximum current, Imax: 32A
• Starting current: 20mA
• Short-time overcurrent (EN62053-21, EN62053-23): 30Imax/10ms
• Current circuit self-consumption (max. current): 0.4W
• Power factor: Specified operating range (EN62053-21, EN62053-23): cosj 0.5 ind...0.8 cap
• Current distortion factor in accordance with EN62053-21
• Measurement-derived auxiliary power supply (self-powered)
  
   

Pulse output:

• Pulse weight: 1 imp/Wh
• Type: SO according to EN62053-31, class A
• Uimp voltage: 12...27Vdc
• Current: 10...27mA
• Pulse duration: 70ms
  
   

Insulation:

• Installation category: III
• Pollution degree: 2
• Insulation reference voltage: 300V
• Alternating voltage test 4kV rms value 50Hz/1min
• Circuits considered: all circuits and ground
  
   

Environmental conditions:

• Reference temperature: 23°C ± 2°C
• Specified operating range: -5...55°C
• Limiting range for storage and transportation: -25...70°C
• Suitable for use in tropical climates
• Maximum power dissipation: 1W For thermal sizing of switchgear
  
   

Enclosure:

• Housing: 1 DIN 43880 modules
• Sealable front panel and terminal block
• Connections: screw terminals
• Mounting: snap-in on 35mm profile
• Profile type: hat type TH35-15 (EN60715)
• Housing material: self-extinguishing polycarbonate
• Degree of protection (EN/IEC 60529): IP20 terminals
• Weight: 100 grams