INSTALLATION:

• Mount at an angle at the top in a vertical position with the lens facing down or in a horizontal position with the lens facing the side to be covered
• Fix with two plugs the base of the sensor and then insert the circuit
• Close the cover and tighten the screw that ensures the fixing of the circuit and insert the screw cover cap to pressure
• Do not point the detector towards objects that could produce rapid temperature changes such as radiators, electric radiators, air conditioners, open flames, etc.
• Do not partially or completely obscure the detector's field of vision. Also avoid installation between the shutter and the internal window.
  
  

Features:

• Hiltron Series
• Screw closing block
• Tamper protection
• Dual element digital sensor (Digipyro™)
• Connection on MPX bus line: 2 wires / 3 wires
• High immunity to RF 30Vm
• Nominal supply voltage : 12Vdc ±10% (Also only from two wires MPX line)
• Maximum power consumption: 2mA (on +12V);1mA (on MPX)
• Lens beams: 5 (vertical)
• Sensitivity levels: 8
• Pulse counter function: 1 ÷ 4 programmable
• Frontal coverage angle (PIR): H: 25 °; V: 75 °
• Coverage: max 6 meters
• Programmable signaling LED
• Initial stabilization time: 60"
• Operating temperature +5 ° C to 40 ° C
• Security grade: 1
• Environmental class: 2
• Dimensions: W77mm - H26mm - D24,5mm
• Complies with CEI EN 50131-1 standards