Industrial Switch 4Power 4N-IG082F for extreme environments
It is an unmanaged industrial switch designed to ensure reliability and operational continuity in critical environments such as production plants, industrial automation, security systems, and corporate infrastructures.
The 8 auto MDI/MDI-X Gigabit RJ45 ports allow fast and stable connections over copper networks, while the 2 1000Base-X SFP slots enable network extension via multimode or single-mode optical fibre.
High performance and traffic management
Thanks to an advanced architecture, the switch ensures smooth data transmission even under heavy traffic conditions.
It supports standard 1000Base-SX/LX SFP transceivers, allowing integration into industrial backbones or long-distance links.
Robust design with industrial protections
Made with an IP40 metal casing, the 4N-IG082F is designed to withstand harsh environmental conditions.
Flexible installation and low consumption
Mounting can be done on a DIN rail or wall. Power supply 12–36V DC via removable 6-pin terminal block with dual power input, consumption less than 5 Watts, with status LEDs for power and network connection.
Ideal for electrical panels, high-performance industrial networks, or critical applications.
| General data |
| RJ45 Ports |
8 RJ45 10/100/1000BASE-T auto-MDI/MDI-X ports |
| SFP Slots |
2 SFP slots of 1000 Mbps |
| Power connector |
Removable 6-pin terminal block (Pin 1/2 Power 1; Pin 3/4 PG; Pin 5/6 Power 2) |
| LED Indicators |
PWR (green), Link (yellow), SFP (green) |
| Power requirements |
12~36 V DC |
| Power consumption |
< 5 W |
| Power protection |
Reverse protection; Overvoltage protection; Overcurrent protection |
| Installation |
DIN rail kit and wall mounting kit |
| Backplane bandwidth |
24 Gbps |
| Packet forwarding rate |
14.89 Mpps |
| MAC address table |
4K |
| Flow control |
Back pressure for half-duplex; IEEE 802.3x pause frames for full-duplex |
| Enclosure |
Metal, IP40 |
| ESD Protection |
ESD 6 kV |
| Dimensions (W x D x H) |
50 x 110 x 150 mm (1.98" x 4.33" x 5.91") |
| Network standards |
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-Tx, IEEE 802.3ab 1000Base-T, IEEE 802.3x, IEEE 802.3z 1000Base-X |
| Stability test |
FCC CFR47 Part 15; EN55022/CISPR22 Class A |
| Immunity / EMC |
IEC61000-4-2 (ESD): ±8 kV contact, ±15 kV air; IEC61000-4-3 (RS): 10 V/m (80 MHz-2 GHz); IEC61000-4-4 (EFT): power ±4 kV, data ±2 kV; IEC61000-4-5 (surge): power ±2 kV/DM ±4 kV/CM, data ±2 kV; IEC61000-4-6 (CS): 3 V (10 kHz-150 kHz) / 10 V (150 kHz-80 MHz); IEC61000-4-16: 30 V cont., 300 V (1 s) |
| Environmental tests |
IEC 60068-2-32 (free fall); IEC 60068-2-27 (shock); IEC 60068-2-6 (vibration) |
| Operating temperature |
-40 ℃ ~ 85 ℃ |
| Operating humidity |
5% ~ 95% |
| Storage temperature |
-40 ℃ ~ 85 ℃ |
| Storage humidity |
5% ~ 95% |
: 1
