Urmet 8 Port PoE Switch 2 Port Uplink Ethernet 10/100m 3000/402
UTD 3000/402
8021156073832
Urmet Switch with 8 10/100m PoE ports + 2 10/100m Ethernet Uplink ports EDGE series with the following features:
- 8 10/100 m PoE ports with RJ45 copper cable
- 2 10/100/1000 m Uplink Ethernet ports
- Max Power Output: 120 W
- Max Power Output per single port: 15.4/30 W
- Supports long transmission up to 250 m
- Exchange capacity: 5.6 Gbps
- Forwarding rate: 4.17 Mbps
- Wall mounting with brackets
- Dimensions: 202x140x45 mm
EDGE Series Switches are appropriately segmented to cover a wide application scenario. They are suitable for direct network connections of video surveillance devices (NVRs and IP cameras) to their respective Switches.
€86.84
€86.84
Tax included
Tax included
Items Available: 8
: 3
The effective connectivity of UPLINK 10/100/1000Mbps ports enables benefits on any type of network due to superior performance by encouraging network expansion.
This high-performance switch features non-blocking switching capacity, and switching speeds of up to 5.6Gbps. All PoE RJ45 ports can automatically adjust the maximum connection speed for normal operation, Auto Uplink technology can ensure proper network connection.
The 3000/402 enables simplified wireless access point (AP) and video surveillance installations. Devices away from the power outlet are powered directly from the switch. PoE eliminates the need to connect these devices to the power outlet. So it makes installation more flexible by preferring it for all those devices to be connected where the AC outlet is far away.
It is an ideal choice for those who wish to set up a small commercial network or a home network using IP-based surveillance cameras.
If the EXTEND dip-switch is ON then the switch allows connection and power to devices (cameras) connected to Poe ports up to a distance of 250m. In addition, the device if selected in EXTEND does not do packet routing between PoE ports so as to speed up routing to and from Uplink ports; in this case an NVR needs to be connected only to Uplink ports in order to see cameras connected on PoE ports.
Features:
- Can power POE devices via CAT 5e cable or higher
- 8 auto-sensing 10/100Mbps RJ45 ports: 8 PoE ports, 2 10/100/1000Mbps uplink ports
- Supports MDI / MDIX
- External power supply
- Total PoE power: 120W (port 1 to port 8)
- Maximum power on single PoE port: 30W
- Store and forward operation, 48kb memory per unit
- Ports 1 to 8 comply with IEEE 802.3af/at standard
- Complies with IEEE 802.3i; IEEE 802.3u; IEEE 802.3x; IEEE 802.3af/at standards
- Flow control: full duplex follows IEEE 802.3x standard, half duplex follows back pressure standard
- All network ports have discharge resistance (AC power port: differential mode +/- 2kV, normal mode +/- 4kV)
- Fanless design, natural cooling
- All ports support automatic speed switching, frame size ranges from 64 to 1536 bytes
- Automatic speed adjustment
- Wall mounting with brackets
- Compact size
There are no reviews
Data sheet
- Type: Network Switch
- System: IP
- Doors: 8+2
