Single-phase photovoltaic inverter ABB UNO DM 6.0kW TL PLUS optimal solution for residential installations. Number 2 of independent MPPTs - Integrated DC disconnector, built-in data logger functionality and direct data transfer over the internet (via Ethernet or WLAN) allow the customer to enjoy the benefits offered by the Aurora Vision® monitoring portal.

The new inverter encapsulates all of ABB's quality in a lightweight and compact design thanks to technology choices optimized for each type of installation. The inverter achieves high performance with the smallest footprint and is equipped with dual MPPT. The commissioning procedure reduces time-consuming setup times, thus also lowering installation time and costs.

Increased ease of use with a user interface that allows access via any WLAN-compatible device (smartphone, tablet or PC) to all advanced configuration features of the inverter, including dynamic feed-in control and load manager.

The flexible and future-proof design enables integration with smart devices for smart building automation.

 

Key features:

• Wireless access to the built-in user interface
• Simplified commissioninig procedure
• State-of-the-art design with native wireless connectivity for easy integration into smart buildings and smart grids
• Dynamic control of grid feed-in (e.g., zero feed-in)
• Remote firmware upgrade for the inverter and its components
• Native Modbus SunSpec (TCP/RTU) communication protocol Remote monitoring via Aurora Vision® cloud
• Dual input section with independent MPPT.
  
   

Technical Specifications: 

 

INPUT:

• Maximum absolute DC input voltage 600 V
• Input DC trigger voltage 200 V (adj. 120...350 V)
• Input DC voltage operating range 0.7 x Vstart...580 V (min 90 V)
• Rated DC input voltage 360v
• Rated DC input power 6200
• Number of independent MPPTs 2
• Maximum DC input power for each MPPT 4000W
• MPPT range of DC voltage 200...480V
• DC power limitation with MPPT configuration in parallel to Pacr, example of maximum unbalance 4000 W [220V≤VMPPT≤480V] other channel: Pdcr-4000W [120V≤VMPPT≤480V]
• Maximum DC input current (Idcmax) / for each MPPT 40 A / 20.0 A
• Maximum input short-circuit current for each MPPT 25.0 A
• Number of input DC connection pairs 2
• DC connection type Quick plug-in PV connector

OUTPUT:

• AC connection type to grid Single-phase
• Rated AC power output 6000 W
• Maximum AC power output 6000 W
• Maximum apparent power 6650 VA
• Nominal AC output voltage 230V
• AC output voltage range 180...264V
• Maximum AC output current 30.0 A
• Contribution to short circuit current 40.0 A
• Rated output frequency 50 Hz / 60 Hz
• Output frequency range 47...53 Hz / 57...63 Hz
• Total current harmonic distortion < 3.0
• Type of AC connections Female panel-mounted connector

OPERATING PERFORMANCE:

• Maximum efficiency 97.40%
• Weighted efficiency (EURO/CEC) 97.0% / -
• Power supply power threshold 8W
• Nighttime consumption <0.4 W

INTEGRATED COMMUNICATION:

• Wireless integrated communication interface
• Integrated communication protocol ModBus TCP (SunSpec)
• Commissioning Web User Interface, Display
• Monitoring Plant Portfolio Manager, Plant Viewer, Plant Viewer for Mobile, Energy Viewer

ENVIRONMENTS:

• Ambient temperature -25...+60°C (-13...+ 140°F) with derating above 45°C/113°F
• Relative humidity 0...100% with condensation
• Maximum operating altitude without derating 2000 m / 6560 ft

PHYSICS:

• IP65 environmental protection rating
• Natural cooling system
• Dimensions (H x W x D) 418 mm x 553 mm x 180 mm
• Weight 20.5 kg
• Mounting system Wall brackets
• Model with DC disconnect switch

Safety:

• Insulation level No transformer
• Certifications CE (50 Hz only), RCM
• EMC and safety standards EN 50178, IEC/EN 62109-1, IEC/EN 62109-2, AS/NZS 3100, EN 61000-6-1, EN 61000- 6-3, EN 61000-3-11, EN 61000-3-12
• Grid connection standards (check availability through sales channel) IEC 0-21, DIN V VDE V 0126-1-1, ITC-BT-40, AS 4777, INMETRO Ordinances 357-2014