Vortice Heat Recovery Unit HRW 30 Mono Evo 0000012434


VOR 0000012434 8010300124346

Decentralized heat recovery ventilation unit Vortice HRW 30 Mono Evo, for installation in residential and commercial rooms of new buildings or subject to renovation for energy efficiency.


 

Ideal not only for ensuring proper air exchange, but also to prevent excess humidity in the room and the occurrence of mold on the walls.

Request info about this product

Vortice Heat Recovery Unit HRW 30 Mono Evo 0000012434

€248.88
€248.88

Vortice Heat Recovery Unit HRW 30 Mono Evo 0000012434

€248.88
Tax included
klarna Pay in installments with Klarna
Out of stock Incoming
qty

Vortice Heat Recovery Unit HRW 30 Mono Evo 0000012434

€248.88

Two-year warranty
Secure Payment
Easy return within 14 days

Special features:

  • Shockproof and anti-UV plastic resin structure
  • Nominal diameter: 100 mm
  • Ceramic type heat exchanger with hexagonal cells. High heat exchange efficiency (up to 90% at minimum air flow rate)
  • High-efficiency EC fan motor; five operating speeds to maximize performance when needed or minimize noise and consumption
  • Controls for on/off, operating mode adjustment and fan speed selection, located on the machine.

     

Three different operating modes:

  • Continuous ventilation with heat recovery: the product cyclically extracts and injects air to and from the room by recovering the energy stored in the heat exchanger
  • Air extraction-only ventilation: stale air is extracted from the room
  • Air supply-only ventilation: the product introduces fresh air into the room
  • Two air filters, an IsoCoarse 65% and a coarser pre-filter for dust, both easily removed for washing them
  • Saturated filter indicator light visible at the bottom of the chassis, immediately behind the front cover
  • Mechanical air supply quick shut-off system integrated into the product chassis
  • External rubber grille, which can be installed from the outside using dowels or inserted from the inside, through the hole in the wall, without resorting to external scaffolding
  • Anti-insect mesh, which can be inserted into the duct from inside the room
  • Possibility of slaving to remote sensors C-TEMP and C-HCS for automatic management of operation logic


     

Features:

  • ISOCoarse 65% filter class
  • Max absorbed current (A) 0.04
  • Nominal Duct Diameter (mm) 100
  • Frequency (Hz) 50-60
  • Insulation II° class
  • Weight (Kg) 3.10
  • Max. power consumption (W) 4
  • Max. ambient temperature for continuous operation (°C) 30
  • Voltage (V) 220-240
  • Max recovery efficiency (%) 90
  • Max flow rate at max speed (l/s) 10.5
  • Max flow rate at max speed (m³/h) 38
  • Max flow rate at min speed (l/s) 1.7
  • Max flow rate at min speed (m³/h) 6
  • Sound power Lw dB (A) - max vel 66.8
  • Sound power Lw dB (A) - min vel 36.6
  • Sound power Lw dB(A) - med vel 49.5
  • Max pressure at max vel (mmH2O) 13.7
  • Max pressure at max vel (Pa) 130
  • Max pressure at min vel. (mmH2O) 1
  • Max pressure at min vel. (Pa) 10
  • Sound pressure Lp dB (A) 3m - max vel 49.2
  • Sound pressure Lp dB (A) 3m - med vel 32.0
  • Sound pressure Lp dB (A) 3m - min vel 19.1

Data sheet

Type:
Heat recovery units