This Din LED Dimmer (1 European module - h 53mm) powered in 230Vca has been conceived and designed with Mosfet technology to control and regulate in a simple way any kind of LED configuration even of unlimited load with the use of more modules.

Through a selector placed on the front you can set its functions of:

• Dimmer for all types of 230V LED and CFL lamps declared dimmable and low voltage spotlights with electronic transformers declared dimmable with "Leading edge" or "Trailing edge" driving 4-100W.
• Dimmer for 230V Acriche LED Modules
• Dimmer for low voltage LED spotlights with toroidal or lamellar transformers at full load 4 - 100W
• Dimmer for Dichroic Spotlights with electronic transformers 4-400W
• Dimmer for dichroic spotlights with toroidal and lamellar transformers 4-400W, incandescent and halogen lamps 4 - 400W.
  
  

In addition, it is possible to set the functions of Stepper Relay, Timer and Timed Stepper Relay always for the load powers indicated above in the Dimmer function.

In order to avoid the annoying flickering of the lamps placed at low brightness, on the front of the LED Dimmer Din there is a trimmer to adjust the minimum brightness to be calibrated from time to time depending on the type and brand of LED lamp used in order to obtain the best performance of stable light with the largest range of adjustment possible.

In the Timer and Timed Stepper Relay function this adjustment trimmer is used to set the time.

In the Dimmer Din LED function, it is possible to have operating cycles with or without Memory, which thus remembers the last light gradation set. This Memory function can be activated or deactivated by pressing the control button for about ten seconds while the circuit is being powered up.

The Stepper Relay function is activated or deactivated by setting the minimum setting trimmer to the maximum value and selecting the CFL RPP function.