Best seller

Maxa Calido 110 hanging heat pump water heater 000425

Advantix Maxa
TIX 000425

Maxa Advantix Calido 110 heat pump water heater, 110 Liters, class A, R134a gas, air temperature from 5°C to+43°C, compatible with thermal accounts, vacation timer, anti-legionella function, supplementary heating up to 75°C.


  • 110L tank capacity, energy class A, load profile M

  • R134a with electronic expansion, enables superior performance at low temperatures

  • Built-in functions: timer, temperature set, vacation, anti-legionella, green mode

  • Electric heater 1.5kW to bring water from 62°C to 75°C

  • S235JR steel tank with double vitrification and magnesium anode, externally wound condenser

  • LCD touch display for management and diagnostics, quiet due to centrifugal fan

  • Suitable to replace traditional water heaters, optimized for thermal account and integrable with photovoltaic system

Accessories included in the package

  • Bracket for wall mounting

  • Fixing screws and dowels

  • Spacers for wall support

  • Dielectric joints

Do you have questions about this product or did you not find what you were looking for? Ask us!
Maxa Calido 110 hanging heat pump water heater 000425
€1,098.00
€1,098.00

€1,098.00
Tax included
Calculate shipping cost

€1,098.00

Buy it within and receive it from Wednesday, 24 December
Two-year warranty
Easy return within 14 days

Maxa Advantix heat pump water heater: Small size and thoughtful aesthetics

Calido 110 is a heat pump water heater with air source for wall or floor application. Perfect for replacing electric water heaters on existing systems, thanks in part to the hot water temperature set, timer and vacation setting, and anti-legionella functions, which can also be managed by Wi-Fi connection or App. Built-in electric heating element allows water to be heated from 62°C to 75°C. Excellent yields even with outdoor temperatures ranging from -5°C to +43°C thanks in part to the electronic expansion valve, which improves performance and makes it eligible for the heat bill.

Energy efficiency and savings

Thanks to the heat pump and R134a refrigerant, the Calido 110 can achieve 34 times higher performance than conventional electric systems, with typical COP of about 3.01 (air+20°C)

Robust and reliable construction

Vitrified tank from steel with anodes and external condenser reduce corrosion and scale. The electrical resistance is protected by an 85°C thermostat to ensure safety and longevity.

Flexible installation

Suitable for both wall (bracket included) and floor mounting. LCD display allows easy selection of operating modes and supports integration with photovoltaic systems via external contact.

Energy class A

Energy saving was considered as a fundamental aspect in the study and design phase of the units. The low power consumption combined with the high efficiency of the compressor-exchanger pair and the use of environmentally friendly refrigerant gas ensure that the units belong to energy class A.

Domestic hot water

The installation of an additional exchanger operating as a condenser in parallel with the air-cooled condensing coil allows the production of domestic hot water regardless of the operating mode of the unit.

Technical specifications of the Calido 110 water heater

FeatureDetail
Energy class A
Declared load profile M
COPDHW (ERP) 3.01
Heating time 6:53 h:min
Energy input in heating 1.58 kWh
Annual electricity consumption (temperate climate) 462 kWh/year
Air flow rate 300 m³/h
Static pressure 60 Pa
Rated electrical power 236 W

+1500

Rated electrical power (Resistance) 1500 W
Rated current 1.14 A

+6.5

Maximum current 1.81 A

+6.5

Power supply 220-240~/1/50 V/Ph/Hz
Maximum output temperature without resistor 60 °C
Refrigerant Type / Charge / GWP R134a / 650 g / 1430
CO2 equivalent 0.93 t
Max refrigerant pressure (suction / delivery) 0.2 / 25 Bar
Safety valve calibration 8 Bar
Hydraulic connections G 1/2 inch Male
Nominal tank volume 110 L
Internal tank treatment Glazed
Sound power 48.5 dB(A)
Net weight 62 kg
Gross weight (with filled tank) 172 kg
Net size (W x H x D) 500 x 1406 x 520 mm
Packing size (W x H x D) 550 x 1460 x 550 mm
Duct diameter 125 mm
Degree of protection IPX1
Operating temperature range -5 ~ 43 °C

Data sheet

Type:
Water heaters
Model:
Heat Pump
Installation:
Vertical
Capacity:
110 Liters
Energy class:
A
Series:
Calido
Contact details of the manufacturer and the responsible person