The Infinity domestic water heater is an instantaneous domestic hot water producer:

• It is placed indoors; installation must be completed with ducts to expel exhaust fumes outside the room
• Energy class A. Hot water, produced only against actual demand, wastes no resources. Unlike a storage tank, the instantaneous water heater does not need to keep large quantities of water in stock at high temperatures. This provides great savings in energy costs and water consumption. There is no need to mix the water, which comes out immediately at the set temperature
• The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in high mountains under rarefied air conditions. When the water heater and utilities are far apart and heat loss is generated, the installer can correct the temperature to the degree of use (+1°C to +3°C) by fine-tuning the temperature at the tap. A progressive alert signals any limescale deposits. This allows the installer to have a cleaning done before getting to a possible malfunction
  
   

Advantages:

• Can be combined with solar panels
• Can be combined with recirculation
• Can be combined with storage tank max
• Max 3 additional remote controls
• High Altitude Function: To be set at altitudes above 900mt, allows optimization of combustion even in conditions of reduced air density
• Perfect temperature despite dispersion
• Standard antifreeze down to -15°C
• Ultrathin
• Eco-friendly
  
  
   

Features:

• Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 15-11
• Indoor noise level (dB) 59
• Indoor Installation / Apartment
• Appliance type Forced flow - Type C
• Min/Max methane heat flow rate (kW) 4.1/27.2
• Water flow rate t 25°C Min/Max (l/min) 2/14 (20 l/min at T = 15°C)
• Max operating temperature (°C) 65
• Min activation pressure (bar) 0.1
• Min/Max operating pressure rating (bar) 1 - 8.3
• Normal / stand-by / antifreeze power consumption (W) 55 / 1.5 / 116
• Dimensions Width 373 mm - depth 173 mm
• Distance between fixing brackets 576mm
• Distance between fixing screws 122mm
• Flue wheelbase 89.2mm
• Weight 14.5Kg
  
   

Fittings:

• Water inlet ½
• Water outlet ½
• Gas ½