Fischer universal clamp for photovoltaic panels 30-50 mm 00519784
Fischer PM U universal end clamp is the ideal choice for the installation of aluminum-framed photovoltaic panels. Thanks to its preassembled structure and easy insertion, it provides secure and quick fastening on Solar profiles, either in the middle or end position, with the following features:
-
Compatible with panels from 30 to 50 mm thick
-
Can be used as end or center clamp
-
Recessed screw to eliminate shading
-
Quick installation with 45-degree rotation
-
Holding spring for easy installation
-
Made of aluminum
Frequently bought together
Fischer clamp fastening for photovoltaic systems
The PM U is designed to simplify the mounting of photovoltaic panels, with a rotating system that allows direct installation on any point of the profile. The internal spring holds the clamp in place during tightening, making the whole operation easier, safer and faster.
No shading
The TCEI screw embedded in the clamp body prevents any shading on PV module cells, ensuring maximum system efficiency.
Recommended applications
-
Fixing photovoltaic panels on Solar profiles
-
Suitable for civil and industrial installations
-
Compatible with aluminum framed modules (30-50 mm)
Mounting method
-
Insert the lower part of the clamp into the upper slot of the profile
-
Rotate 45 degrees, clockwise for end use, counterclockwise for middle use
-
Position the clamp correctly to secure the module
-
Tighten the screw with a hex wrench (SW 6 mm) applying a torque of 10 Nm
Technical Specifications Solar Profile Clamp
| Material | Aluminum EN AB 46100 |
| Compatible panel thickness | 30-50 mm |
| Installation | By rotation, on Solar profiles |
| Screw type | TCEI with cylindrical head and hexagonal recess |
| Tightening torque | 10 Nm |
| Required wrench | SW 6 mm |
Data sheet
- Type: Clamps
: 555

