Bticino dual technology curtain detector 4272
Curtain motion detector with the following features:
- Power supply voltage 9.6 -14.5 Vdc
- Dual technology with antimasking function for outdoor use
- With built-in tear protection in the sensor (technology with accelerometer)
- Range 12 meters
- IR sensor two sensitive areas (dual elements)
- Absorption 30 mA max
- Solid state alarm relay, 60 V, 50 mA isolation 1500 Vrms
- Complete with mounting bracket
Bticino dual technology curtain detector 4272
Tax included
Dual technology outdoor motion detection sensor (PIR+MW), with curtain coverage. It is suitable for the protection of doors, windows and shop windows or more generally in any outdoor installation, where it is necessary to cover well-defined areas. It is in fact able to create a curtain coverage with an angle of 7.5 ° and with an adjustable range up to 12 meters. It is equipped with a station with accelerometer for anti-tear and a microswitch against the opening of the front and infrared leds for anti-masking analysis.
Operation of the anti-masking analysis: The anti-masking analysis can be enabled and disabled using the DIP-SWITCH 2. When the DIP-SWITCH is ON, if a masking is detected, the relay at the terminal F (masking/fault) is closed.
The masking analysis considers both quantities:
- Microwave
- Infrared
- Note: In the particular case of infrared, the analysis is performed by active infrared LEDs.
Function of the anti-tear analysis: When the sensor is switched on, the accelerometer is calibrated for the acquired position. Immediately after a displacement detection, the inertial sensor tares again to the current position.
Other features:
- Tamper switch form A (NC) 50 mA at 30 Vdc
- Microwave operating frequency 24.125 GHz; range 12 meters
- Operating temperature (- 20) - (+ 55) °C
- Degree of protection IP54
- Overall dimensions: 130 x 40 x 40 mm (H x W x D)
Data sheet
- Type:
- Detectors
- System:
- Curtain