Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergency cases such as: drawing water from tanks or rivers, emptying swimming pools and fountains or excavations and underpasses. Also suitable for gardening and general hobbies.

The level switch allows a fixed installation guaranteeing automatic operation.

Also available in a version with a special stainless steel pump shaft (SV).

 

PUMP CONSTRUCTION FEATURES

Pump body, impeller, cap and suction grille made of water-resistant technopolymer. Motor, rotor shaft and hardware made of stainless steel. Triple interposed ring seal with oil pre-chamber.

 

MOTOR CONSTRUCTION FEATURES

Submersible asynchronous type with continuous duty. Stator inserted in a stainless steel hermetic enclosure and covered by a cover enclosing wiring, microswitch and capacitor. Rotor mounted on greased-for-life, oversized ball bearings for quiet operation and durability. Built-in thermal-amperometric protection and permanently inserted capacitor in single-phase version. For protection of the three-phase motor, the use of a remote motor protector in accordance with standards is recommended.

 

Features:

• Single-phase voltage 220-240 V / 50 Hz.
• Standard cables for the single-phase version 5 meters H05 RN-F
• Standard plug for single-phase version: SCHUKO CEE 7 - VII - UNEL 47166-68
• Operating range: from 1 to 16 m3/h with heads up to 10.2 meters
• Liquid temperature range: 0°C to +35°C for domestic use
• Pumped liquid: turbid water without fibers
• Passage particle size through the suction grid: 10mm
• Min suction depth: 175mm
• Maximum immersion: 7 meters
• Maximum dry running time: 1 minute
• Degree of protection: IP 68
• Insulation class: F.