FOR GATES MAX 500KG

FAAC Sliding gate automation kit DELTA 2 composed of:

1 piece Gearmotor 740 E Z16 Quick and easy installation thanks to the built-in, pre-wired electronic equipment - The irreversibility of the gearmotor avoids the installation of electric locks - In the event of a blackout, the key-protected rotary release device allows the gate to be opened and closed manually - Simplified 'on display' programming. - Magnetic limit switch. - Built-in encoder for obstacle reversal and precise management of partial opening and slowdown Model: 740 E Z16 with encoder Mains voltage: 230V~ 50 Hz Electric motor: Single-phase Max power: 350 W Max torque: 18 Nm Max thrust force: 450 N Reduction ratio: 1:25 Max leaf width: 15 m Speed adjustment and motor control: No Limit switch: Magnetic Model: 740 E Z16 with encoder Pinion: Z16 module 4 Encoder: Optical encoder Force adjustment: Via electronic board Ambient operating temperature: -20°C ÷ +55°C Thermoprotection: 140°C Degree of protection: IP44 Weight: 10 Kg Dimensions (WxDxH): 295 x 221 x 322 mm (1097805);

1 piece FAACLED 230V Flashing light Model with intermittent light equipped with LED circuit and integrated flashing, including external support for mounting any antenna. Power supply 230Vac Protection IP55 Cap colour yellow. (410023);

1 piece Pair of photocells XP20 D Supply voltage: 24V_ Max photocell distance: 20 m Type of installation: wall-mounted Protection class: IP54 Self-alignment angle: ± 7° (20m) ± 13.5° (5m) Horizontal orientation angle: -90° +90° Obstacle detection time: 13 ms Dimensions (WxDxH): 41.5 x 42.5 x 130 mm Absorbed current: Rx (30 mA) + Tx (20 mA) Type of contacts: N.C. Contact rating: 60 VA / 24 W Ambient operating temperature: -20°C ÷ +55°C (785102);

1 piece Key and control pushbutton XK10 Type of installation on wall or column Exchange microswitches 1 Contact rating 100 mA Degree of protection IP54 Operating ambient temperature -20 °C +55 °C Dimensions (WxDxH) 72 x 35 x 100 mm (401302)

1 piece Custom key lock (71275101);

1 piece Plug-in receiver 1 channel RP 433 SLH Equipped with patented FAAC rolling code encrypted SLH self-learning coding system which can store up to 250 codes. It works on the frequency of 433Mhz and manages the transmitters FAAC XT2 433 and XT4 433. The receiver is also equipped with a 5-pin molex connector that makes it possible to quickly connect it to FAAC equipment that is equipped with such a connector. Supply voltage from 20V to 30V dc Up to 250 transmitters can be memorised Nominal range 50m Dimensions 55x53 mm (787824);

1 piece Transmitter 2 channels XT2 Two-channel transmitter for gate automation original FAAC XT2 433 Mhz cod, 787007. Equipped with SLH function that allows the cloning of a transmitter of the same type while being rolling code facilitating the installation. Equipped with LR system to increase the transmission range. Colour: white. (787007);

1 piece "Automatic Gate" warning sign