In this category you will find circuit breakers automatic motor overload protection Schneider Telemecanique Schneider series TeSys GV2, for the control manual and local when the switch for the motor is used alone and automatic control and at a distance, when the switch is associated with a contactor.
Motor protection ensured by devices circuit breakers integrated in the switch
No component is under tension, is accessible to direct contact of the fingers
The addition of a shunt trip coil minimum voltage ensures the opening of the switch in case of voltage drops
The addition of an opening coil, allows the command of the remote opening of the switch
The command for the opening and closing of the switch can be locked in position “N/C" with 3 padlocks
Connectors: spring terminals, screw terminals
Power outage from 10 to 100 KA
Protection co-ordination type 1 or type 2, depending on the association
Conformity to standards IEC 947
The magnetic elements provide a threshold that is equal to about 13 times the current maximum adjustment of trip units thermal. Thermal elements of overload protection, are adjustable and compensated against changes in ambient temperature. The adjustment potentiometer is protected by a transparent cover which can be lucchettato.
Specific products for:
Industry, infrastructures, buildings etc.,
Control and protection of motors, in accordance with standards IEC 947-2 and IEC 947-4-1
Can be easily installed in any configuration with screws or fastening with hook on mounting rails