Relay for switching on the lamps according to the room brightness level.

Pole and wall mounting.

Features:

• Finder Series
• Single pole interruption (L)
• Minimum switching load 1000 (10/10) mW (V/mA)
• Standard contact material AgSnO2
• Operating range (0.8...1.1)UN in AC (50 Hz)
• Electrical life at rated load in AC1 100 - 10 cycles
• Switching threshold adjustment 1...80 lx
• Preset switching threshold 10 lx
• Switching time: on/off 15/30 s
• Ambient temperature: -30...+70°C
• Degree of protection IP54
  
  
  

Lamp capacity:

• incandescent/halogen 230V 2300W
• fluorescent with electronic ballast 500/1000W
• fluorescent with rephased electromagnetic ballast 400/750W
• CFL 200/400W
• LED 230V 400W
• Halogen or BT LED with electronic transformer 200/400W
• halogen or BT LED with 400/800W electromagnetic transformer
  
  
  

Advantages:

• Unipolar interruption (L)
• Sensitivity adjustment from 1 to 80 lux
• Cadmium-free contacts
• Cadmium-free photosensor element (IC photo diode)
• Circuit with isolation transformer
• Italian patent - Innovative principle of compensation for the influence of controlled lights, also compatible with slow-start lamps (up to 10 minutes)
• First 3 operating cycles of the relay without switch-on and switch-off delay, in order to facilitate adjustment operations by the installer