Urmet Yokis MTR500E Step-by-Step Electronic Relay with Neutral 5454050
UTD 5454050
3760054540507
Urmet Yokis MTR500E electronic relay 500W step by step without built-in neutral, with the following characteristics:
- Line voltage: 230V (+10% - 15%) - 50Hz
- Power: min. 5VA max. 500VA (300VA in sealed boxes)
- Maximum current: 1.3A / 2.2A watertight boxes: 1.3A /300VA other boxes: 2.2A /500VA
- Ambient temperature: -20°C/+40°C
- Relative humidity: 0 to 90%
- Dimensions (W x H x D): 37 x 35 x 12 mm
€42.81
€42.81
Tax included
Tax included
Items Available: 14
: 4
The MTR500E relay connects easily without a neutral. It works with pushbuttons of any civilian series. It is compatible with existing wiring where the common pushbutton is to neutral or phase (possibility of use in 3-wire or 4-wire mode): with interrupted, diverted or inverted, through replacement of controls in simple pushbuttons.
"Soft start" and "soft stop" functions allow protection of light load, retina and improvement of light perception. 100% waterproof for outdoor installation.
It can be centralized by pilot wire using the CVI50 accessory (code 5454805), allowing simultaneous switching on or off of several actuations, even of different types.
Additional information:
- Level of protection: built-in electronic protection in the event of a short circuit on the load, with automatic reset after fault clearance; electronic protection against overheating; double thermal protection with power interruption; digital coil protected in the event of prolonged button actuation.
- Mains noise immunity up to 1.5 kV.
- 12 or 48VAC or DC drive capability with the addition of the ADBT accessory.
There are no reviews
Data sheet
- Type: Relays
