Finder switching power supply 24VDC 12W 1A modular 781212302400

FIN 781212302400
8012823369556
Switching power supply unit Finder Type 78.12, with the following features:
- Supply voltage in AC (50/60 Hz) 110...240V, in DC non-polarized 220V
- Nominal voltage 24V
- Operating range 100...265V AC (50/60 Hz), DC 140...370
- Max. power consumption 28.2VA, (@ 100V AC, 50 Hz) 14.2W
- Maximum current consumption (@ 88 V AC) 0.25A
- Maximum peak current (@ 265 V) for 3 ms 10A

€42.72
€42.72
€42.72
Tax included
Tax included
Items Available: 8
€42.72
Buy it within and receive it from Thursday, 21 August
Features:
- Finder Series
- Output 24 V DC, 12 W
- 17.5 mm (1 module) x 61 mm deep
- Supply voltage (50/60 Hz) AC 24V, DC 24V
- Output current (input -20...+40 °C, 230 V AC) 0.63A
- Nominal current IN (50 °C, full operating range) 0.50A
- Nominal power 12W
- Output power (-20...+40 °C, input 230 V AC) 15W
- Peak current for 3 ms: 2A
- Voltage fluctuation (from no load to full load) < 1%
- Ripple voltage at full load <200 mV
- Hold-up time at 100 V AC input ms: > 10 - full load: at 260 V AC input ms:> 90
- Stand-by power consumption: < 0.4W
- Power Factor: 0.50
- Efficiency (@ 230 V AC) 85%.
- MTTF h> 400 - 10
- Switch-on delay < 1S
- Dielectric strength between input/output 2500V AC
- Ambient temperature °C-20...+60
- Protection category IP20
Advantages:
- Low stand-by consumption (< 0.4 W)
- Internal thermal protection, with output shutdown
- Short-circuit protection: Hiccup mode (automatic reset)
- Overvoltage protection: Varistor
- Flyback circuit type
- Complies with EN 60950-1 and EN 61204-3 standards
- Parallel connection for automatic redundancy: with OR-IN diode
- Dual and series connection
- Suitable for 35 mm rail mounting (EN 60715)
Data sheet
- Type: Power supplies
- Voltage: 24V
- Degree of protection: IP20