Abb switching power supplies 5A Single phase 24VDC 120W 1SVR320561R1000
ABB 1SVR320561R1000
4013614561108
Abb CP-S.1 24/5.0 switched-mode power supply with the following features:
- Number of phases: 1
- Rated input voltage (UIN): 100 ... 240 V AC - 100 ... 250 V DC
- Input voltage (Uin): 85 ... 264 V AC - 90 ... 277 VDC
- Typical input current: (115 V AC) 1.24 A - (230 V AC) 0.67 A
- Waiting time: (230 V AC) min. 20 ms
- Rated frequency: 50/60 Hz DC
- Rated frequency: 45...65 Hz
- Dimensions in mm: Width 35.5, Height 129.4, Depth: 127
- Net weight 0.69 kg
- Output characteristic: U/I characteristic curve with power reserve
- Nominal output power: 120 W
- Output power: 120 W
- Nominal output voltage: 24 V DC
- Output voltage (Uout): 24 V DC
- Output current: 5A
- Maximum output current (Iout): 7.5 A
€101.54
Items Available: 2
: 1
The CP-S.1 24/5.0 is a power supply from the next generation CP-S.1 range.
The switch-mode primary power supply offers a wide input range of 85-264 V AC and 90-277 V DC, the nominal input voltage is 100-240 V AC, respectively 100-250 V DC. The rated output power is 120 W, the rated output current is 5 A with an output voltage of 24 V DC. The output voltage is adjustable in a range between 24 and 28 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 150% for 5 s and allows parallel operation to increase capacity and enable redundancy. Additional features are: power factor correction acc. to EN 61000-3-2.
Other technical features:
- Degree of protection: IP20 housing - IP20 terminal
- Pollution degree: 2
- Capacity input circuit connection: Flexible with ferrule 0.5 ... 4.0 mm², Flexible 0.5 ... 4.0 mm², Rigid 0.5...4 mm²
- Connection of the capacity output circuit: Flexible with ferrule 0.5...4.0 mm², Flexible 0.5...4.0 mm², Rigid 0.5...4.0 mm². 4.0 mm², Rigid 0.5...4 mm²
- Tightening torque: Input circuit 0.5 Nm, Output circuit 1.13 Nm
- Strip length: Auxiliary circuit 7 mm, Input circuit 9 mm, Output circuit 9 mm
- Minimum mounting distance: Other device Same type, horizontal 30 mm, Other device Same type, vertical 50 mm
- Mounting Position: 1
- DIN rail mounting: TH35-15 (35 x 15 mm Mounting Rail) according to IEC 60715, TH35-7.5 (35 x 7.5 mm Mounting Rail) according to IEC 60715
- Ambient temperature: In operation -25 ... +70 °C - In storage -40 ... +85 °C
- Maximum permissible operating altitude: 5000 m
- Damp heat resistance acc. to IEC 60068-2-30: Db test: 55 °C, 2 cycles
- Shock resistance acc. to IEC 60068-2-27: 30 g 3 shocks 6 ms
- Vibration resistance to IEC 60068-2-6: ±0.15mm 10...58Hz - 10 scan cycles per axis: 2g 58 ... 150 Hz
UL/CSA technical department:
- Input circuit connection capacity UL/CSA: Flexible with ferrule 20-12 AWG, Flexible 20-12 AWG, Rigid 20-12 AWG
- UL/CSA output circuit connection capacity: Flexible with ferrule 20-12 AWG - Flexible 20-12 AWG - Rigid 20-12 AWG
- UL/CSA tightening torque: Input circuit 4.4 in-lb - Output circuit 4.4 in-lb
Impulse Withstand Voltage (Uimp)
- Input circuit / Output circuit 4 kV
- Input circuit / PE 4 kV
- Input Circuit / Relay Contact 4 kV
- Output Circuit / PE 0.8 kV
- Output Circuit 0.8 kV
Rated insulation voltage (Ui)
- Input / Output Circuit 300 V
- Input circuit / PE 300 V
- Input Circuit / Relay Contact 300 V
- Output Circuit / PE 50 V
There are no reviews
Data sheet
- Type: Power supplies
- Voltage: 24V
- Degree of protection: IP20
