PCM100 is an automation control unit for sliding gates. It manages one gearmotor at 230Vac 700VA max, type MS100 or MS200, and one gearmotor MS200T at 380Vac 550W respectively. PCM100 is equipped with a sophisticated self-diagnostic circuit that constantly monitors the correct operation of the system and the connected equipment; in the event of anomalies, this circuit intervenes by blocking the operation of the control unit. Monitoring of the operation of the peripheral equipment connected to the control unit is displayed by means of LEDs located on the circuit. PCM100 is also equipped with an electronic brake that reduces the stopping distance of the gate. As an alternative to the brake, the slowdown function intervenes 3 seconds before the intervention of the limit switch, both during opening and closing, which allows the slow approach of the gate. All gate movements are preceded for about 2 seconds by the activation of the flashing light.

Characteristics:

• Rated supply voltage: 230V~ ±5% 50Hz
• Max power gear motor 700 VA
• Rated voltage output services: 24V~ ±5% max 0,3A
• Maximum absorption 6VA
• Maximum current at services output 125 mA
• IP44 enclosure protection degree
• Peripheral devices status monitoring through LEDs
• Opening/closing time: 90 seconds max
• Pause time 4 ÷ 60 seconds
• External container ABS (plastic)
• Operating temperature -25°C +55°C
• Dimensions: width 127 mm - height 138 mm - depth 57 mm
• Weight 0.075 Kg
• SLOWING" function with "BRAKE" trimmer at minimum
• BRAKE" function adjustable with the trimmer and always excludable with the trimmer set to minimum
• Predisposition for FX30 safety photocells with relay outputs
• Adjustment trimmers: "BRAKE", "PAUSE", "PUSH FORCE".