RM press fittings are suitable for use in hot and cold water distribution systems for sanitary or heating/cooling purposes. For plastic or multilayer pipes. Double black O-ring for compliant sealing. For plumbing systems.

 

The design and production of the fittings has been taken care of down to the smallest detail giving special reliability to the components to facilitate the work of the installer putting him in conditions of maximum safety.

 

Among the main peculiarities are the stainless steel sleeve with countersink to facilitate pipe insertion, the Ring, a sleeve stop for visual control of the correct insertion at the bottom of the pipe to be connected, and the septum insulator for multilayer pipe joints.

 

The fittings are supplied fully assembled and the size of the corresponding pipes is clearly stamped on the sleeve.

 

In the case of underground installations, avoid contact between the cement mixture and the metal parts of the fitting. It is advisable to make a joint that can be inspected, for example by using a recessed plastic box, or at least insulated from the structure and free to expand, so that chemical reactions on metal surfaces and stresses due to thermal expansion are avoided.

 

Features:

• Temperature range: 5/+110 degrees
• Maximum working pressure: 10 bar
• Suitable for plumbing systems (heating, cooling and domestic water)