Datasensing Inductive Sensor PRX M12 SCH PNP NA with IP67 Cable AM1/AP-3A

DTG AM1/AP-3A
Datasensing PRX M12 SCH PNP NA cylindrical inductive sensor with cable with the following characteristics:
- Nominal sensing distance: 4 mm
- Operating distance: 0 - 3.2 mm
- Standard M12 flush mounting
- Operating voltage: 10 - 30 VDC
- Housing material: nickel-plated brass
- Connections: 2-meter PVC cable
- Degree of protection: IP67
Included accessories: 2 M12x1 nuts.

€22.21
€22.21
€22.21
Tax included
Tax included
Items Available: 6
€22.21
Buy it within and receive it from Tuesday, 12 August
Features:
- Standard lens: 12x12mmFE360
- Correction factor: copper: 0.33/aluminum: 0.4/brass: 0.5/stainless steel: 1.05
- Thermal drift of Sr: < 10%
- Repeat accuracy: < 5% (UB 24V Ta=23°C ±5°C)
- Standard M12 flush mounting
- Switching frequency: 2kHz
- No-load supply current: 10 mA
- Load current: 200 mA
- Leakage current: 10A
- Output voltage drop: 1.8V@200mA
- Maximum ripple content: 10%
- LED indicators: Output status yellow LED
- Delay before availability: 50ms
- Short circuit protection
- Reverse polarity protection
- Protection against impulse overvoltage
- Protection against inductive loads
- Mounting: Shielded
- Active head material: PBT
- Tightening torque: 10 Nm
- Operating temperature: -25/+70 degrees
Data sheet
- Type: Sensors
- Degree of protection: IP67