LADN20 is an additional auxiliary contact block from Schneider Electric for TeSys D and TeSys F contactors. A front-mount block, it features 2 NO instantaneous contacts up to 10 A 690V AC. Easy front installation by clip, ensures high reliability and durability.

Connections-clamps:

• Screw fastening terminals 1 cable 1...4 mm²flexible with cable termination
• Screw clamps 1 cables 1...4 mm²flexible without cable termination
• Screw clamps 2 cables 1...2.5 mm²flexible with cable termination
• Screw clamps 2 cables 1...4 mm²flexible without cable termination
• Screw clamps 1 cable 1...4 mm²rigid without cable termination
• Screw clamps 2 cables 1...4 mm²rigid without cable termination
  
  
  

Tightening torque:

• 1.7 Nm - with Ø 6 mm flat screwdriver
• 1.7 Nm - with Philips screwdriver No 2
• 1.7 Nm - with pozidriv screwdriver No 2
  
  

Other technical features:

• Minimum switching current: 5 mA
• Minimum switching voltage: 17V
• Non-overlapping time: 1.5 ms to deactivation without overlapping between NC and NO contacts, 1.5 ms to activation without overlapping between NC and NO contacts
• Insulation resistance: > 10 MOhm
• Environmental characteristics: normal environment
• Degree of protection IP20 complying with IEC 60529
• Protection treatment: TH complying with IEC 60068
• Storage temperature: -60/+80 °C
• Operating ambient temperature: -5/+60 °C
• Operating altitude: 3000 m
  
  

Dimensions and color:

• Color: dark gray
• Height 48 mm
• Width 26 mm
• Depth 42 mm