Bticino Axolute built-in thermostat with display 2 modules H4691
Bticino Axolute series built-in thermostat with backlit display 2 modules
![](https://www.elettronew.com/18068-large_default/bticino-axolute-built-in-thermostat-with-display-2-modules-h4691.jpg)
Bticino Axolute built-in thermostat with display 2 modules H4691
Tax included
![klarna](/../img/logo-klarna-list.png)
Frequently bought together
Advantages:
- Allows temperature control of a single zone, both in the presence and absence of a central temperature control unit.
- It is equipped with a temperature probe and an input for connecting a contact line (e.g. window contact).
- It allows the management of different types of systems and the regulation of the fan speed in case of use of fan coils.
- Possibility of automatic operation (summer/winter) with compatible systems.
- Connection to SCSBUS
- Dimensions: 2 modules.
This device can be used both in the presence and absence of a temperature control unit and, if suitably configured, can be used as:
- Probe in MyHOME thermoregulation system;
- Thermostat in hotel room;
- Thermostat in domestic system
It has 4 buttons with which it is possible to select the desired temperature and the different operating modes and, in the case of use with fan-coils, manage the fan speed.
The thermostat is able to manage different operating modes: both automatic and manual, as well as Eco, Comfort, Antifreeze/Thermal Protection and OFF presets. It can also be used in mixed heating/cooling systems if the two functions are available at the same time on the same system.
A contact is also available on the back of the device that can be used to change the operating status of the thermostat (e.g. window contact, summer/winter switching, etc.).
Features:
- Power supply from SCS BUS: 18 - 27 Vdc
- Absorption: 14 mA with display off 16 mA with low brightness display 30 mA with high brightness display
- Operating temperature: 0 - 40 °C
- Overall dimensions: 2 recessed modules
- Recommended installation height: 150 cm from the ground
- Load control: On/Off, Open/Close, 3-point or 0 - 10 V valves. 2 and 4-pipe fan-coils with On/Off valves, 3-point or 0 - 10 V. 2 and 4-pipe fan-coils with speed control 0 - 10 V. Climaveneta gateway. Fil Pilote.
The thermostat must be used in combination with the following actuator devices:
- F430/2: actuator 2 ON/OFF relays;
- F430/4: actuator with 4 ON/OFF relays;
- F430R8: actuator with 8 ON/OFF relays;
- F430R3V10: actuator 3 relays ON/OFF and 2 outputs 0 - 10 V;
- F430V10: actuator with 2 0 - 10 V outputs;
- F430FP: actuator for Fil Pilote devices
Data sheet
- Type:
- Thermostats
- Model:
- With display
- Installation:
- Recessed
- WIFI:
- No