Submersible electric pump DAB 4" S4 3/25 1.5kW 60190707
DAB 60190707
8059893195647
DAB 4" S4 3/25 1.5kW Multi-impeller 4-inch Submersible Electric Clean Water Pump designed for pressurization, gardening and irrigation tasks, subsurface drawdown in domestic and residential, civil and commercial settings, and irrigation systems also in agriculture:
- Power rating 1.5kW/2HP
- Diameter 99mm
- Connection 1" 1/4 inch
- Volume 0.018 m3
Only Pump to be added single-phase or three-phase motor (see below in accessories).
€226.90
€226.90
Tax included
Tax included
Items Available: 12
: 2
Frequently bought together
PUMP CONSTRUCTION FEATURES
Technopolymer impellers housed in stage housing with stainless steel shim rings. Pump jacket, shaft, coupling with motor, integrated suction strainer and stainless steel cable cover. Suction and delivery supports made of microcast AISI 304 stainless steel. Removable technopolymer built-in check valve or stainless steel plate check valve (see material table). Technopolymer impellers designed to ensure high levels of efficiency in accordance with Directive 2009/125/EC (Eco design - ErP) with MEI index ? 0.4 for the entire range. ACS certified and undergoing WRAS and DM174 certification.
MOTOR CONSTRUCTION FEATURES
Pump housing that can be coupled to 4GG, 4OL motors (4TW and 4GX on request). 4GG is a two-pole asynchronous motor made of AISI 304 stainless steel for parts in contact with water. Cooling and lubrication of thrust bearing assembly and bushings by mixture of water and glycol. Rotor mounted on Kingsbury-type self-centering thrust bearing assembly capable of withstanding high axial loads. The stator is immersed in insulating thermoset resin with high thermal dissipation capacity and encapsulated in a hermetically sealed AISI 304 stainless steel casing. 4OL is a two-pole asynchronous motor made of AISI 304L stainless steel for parts in contact with water. Cooling and lubrication of the ball bearings are provided by a special liquid approved for food use. The rewindable stator is inserted in an AISI 304L stainless steel jacket attached by steel pins to the upper motor support. Equipped with a carbon-ceramic mechanical seal.
Both motors have removable cable connector, ACS, WRAS and KTW certified cable, motor suitable for inverter use (30 Hz - 50 Hz). For both motors in the single-phase 50 Hz version, the capacitor and manual reset thermal-amperometric protection are in the switchboard supplied or to be ordered separately depending on the configuration chosen. In the three-phase version, the protection is the responsibility of the user.
Features:
- Rated power 1.5kW/2HP
- 99mm diameter
- Chords 1" 1/4
- Volume 0.018 m3
- Type of pumped liquid: Clean, free of solids or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
- Maximum amount of sand: 150 g/m3
- Impeller construction material: Technopolymer
- Liquid temperature range: 0°C to + 40°C
- Maximum immersion depth: 4GG: 300 m - 4OL: 250 m
- Maximum number of starts: 20/h
- Degree of motor protection: IP 68
- Motor insulation class: F
- Possible type of installation: fixed in a vertical position. In case of horizontal installation, a cooling jacket is recommended.
There are no reviews
Data sheet
- Type: Electric submersible pumps
- Connections: 1-1/4 inches
