Fracarro IF-IF central control unit 4 Satellite + 1 TV inputs and 2 taps 1OUT 271138
FRA 271138
8016978099764
Fracarro IF-IF central unit model SCD2-32IF SSA 4 inputs Satellite and 2 derivatives 1OUT with the following features:
- Supply voltage: 220-240 Vac
- Frequency: 50/60 Hz
- Inputs: 4 Satellite + 1 TV
- Outputs: 1 Satellite + TV
- Derivatives: 1 (Satellite, TV)
- Number MUX output: 32
- Compact IF-IF control unit to convert up to 32 DVB-S/S2 transponders with SCD2 (dCSS) technology
- Total Satellite output 127dBuV
- Satellite gain adjustment 20dB
- Satellite slope adjustment 15dB
€292.80
Items Available: 3
: 2
Advantages:
- SCD2-32IF SSA: 4 Satellite inputs, 1 passive TV input and 1 mixed derivative with: total Satellite 127dBuV output level; sockets up to 150 meters from the headend can be served; Satellite 20dB gain adjustment and Satellite 15dB slope adjustment
- Automatic Gain Control (CAG): maintains adequate output level even when input transponder power varies (from 55dBuV to 85dBuV)
- Compatible with both traditional LNB (UX-QT LTE) and Wideband type LNB (UX-WB LTE) to handle the 4 polarities of a satellite with only two cables
- LED monitoring of: operation of the part, connection to the USB port, correct power on of the product and presence of tele-power and of the possible presence of input short circuit
- In isofrequency configuration; the product can also be used to equalize and amplify an entire satellite polarity
- Fixed (IF-IF) or Dynamic modes (by driving them from the DiSEqC controls of the SCR or SCD2 decoder)
- Configurable slope of the generated signal (up to 8dB, adding to the 15dB in the SCD2-32IF SSA model) so as to compensate for cable loss in distribution
- Dual power ports to be able to offer greater robustness to the system
- Compact size, especially when compared to that of an equivalent IF-IF central unit with 32 programmable filters
- Free PC configuration SW on the site, to define through the USB port: the input, output frequencies and other configuration parameters of the central unit (level, tilt, ...).
Features:
Power consumption:
- Power supply voltage Vac/Hz 220-240, 50-60
- Power plug 2 with F connectors (the second one is optional, only serves to give more robustness to the piece power supply)
- Power consumption without LNB mA 600, 12
- Absorption with LNB mA 1200, 12
- Maximum SAT line current mA 600 @12V
Derivative:
- MUX number output 32
- Mode of operation IF-IF Static / SCR / SCD2 (dCSS)
- Bandwidth SAT MHz 950-2150
- Bandwidth per mux SAT MHz 20-60
- SAT frequency accuracy KHz < 50
- DiSEqC-SCIF 1st and 2nd generation switching standards (SCD / SCD2) SCR (EN50494) and SCD2 (EN50607)
TV:
- TV bandwidth MHz 114-790
- TV pass-through loss dB -2
SAT:
- SAT bandwidth MHz 250-2350
- Gain adjustment dB 20
- SAT slope adjustment dB 15
- Slope adjustment for MUX dB 8 (via SW)
- CAG dynamics dBµV 55-85
- Max SAT output level dBuV 112
- Max SAT tone output level 107
- Maximum SAT input level dBuV 97
- Maximum SAT output level dBuV 127
General characteristics:
- Power supply dimensions 145x120x70 mm
- Working temperature °C -10/+55
- Dimensions mm 200x110x30
- SAT-SAT isolation dB >35
- TV SAT isolation dB >25
There are no reviews
Data sheet
- Type: Front panels
- Version: 5IN/1OUT
- Model: 20db
