Characteristics:

• Power supply from SCS BUS: 18 - 27 Vdc
• Absorption: 14 mA with display off 16 mA with display low brightness 30 mA with display high brightness
• Operating temperature: 0 - 40 °C
• Overall dimensions: 2 recessed modules
• Recommended installation height: 150 cm from the ground
• Load control: On/Off, Open/Close, 3-point or 0 - 10 V valves. 2 and 4-pipe fan-coils with On/Off valves, 3-point or 0 - 10 V. 2 and 4-pipe fan-coils with speed control 0 - 10 V. Climaveneta gateway. Fil Pilote.
  
  

The thermostat must be used in combination with the following actuator devices:

• F430/2: actuator 2 ON/OFF relays;
• F430/4: actuator with 4 ON/OFF relays;
• F430R8: actuator with 8 ON/OFF relays;
• F430R3V10: actuator 3 relays ON/OFF and 2 outputs 0 - 10 V;
• F430V10: actuator with 2 0 - 10 V outputs;
• F430FP: actuator for Fil Pilote devices
  
  

It allows to control the temperature of a single zone, both in presence and absence of a thermoregulation unit.

It is equipped with a temperature probe and an input for connecting a contact line (e.g. window contact).

Allows management of different types of systems and adjustment of the fan speed when using fan coils.

Possibility of automatic operation (summer/winter) with compatible systems. Connection to SCSBUS. - Dimensions: 2 modules.

Thermostat with display for controlling the room temperature in temperature control systems.

This device can be used both in the presence and absence of a temperature control unit and, if suitably configured, can be used as:

• Probe in MyHOME thermoregulation system;
• Thermostat in hotel room;
• Thermostat in domestic system

It has 4 buttons with which it is possible to select the desired temperature and the different operating modes and, in the case of use with fan-coils, manage the fan speed.

The thermostat is able to manage different operating modes: both automatic and manual, as well as Eco, Comfort, Antifreeze/Thermal Protection and OFF presets. It can also be used in mixed heating/cooling systems if the two functions are available simultaneously on the same system. There is also a contact on the back of the device that can be used to change the operating status of the thermostat (e.g. window contact, summer/winter switching, etc.).