Finder adjustable wall-mounted occupancy detector IP55 18.A1.8.230
FIN 18A182300000
8012823400167
Wall-mounted, adjustable presence detector, Finder Type 18.A1, with the following features:
- Nominal supply voltage 110/230V AC (50/60 Hz)
- Nominal voltage/ Max. switching voltage 230/230V AC
- 1 NO contact 10 A
- Rated power VA (50 Hz)/W 2/0.8
- Nominal current/Max instantaneous current 10/20 (100 A - 5 ms)
- Rated load on AC1:2300 VA
- Rated load on AC15: 450 VA
![](https://www.elettronew.com/7479-large_default/finder-adjustable-wall-mounted-occupancy-detector-ip55-18a18230.jpg)
Finder adjustable wall-mounted occupancy detector IP55 18.A1.8.230
€37.75
€37.75
Tax included
Tax included
![klarna](/../img/logo-klarna-list.png)
Items Available: 70
Features:
- Finder Series
- Operating range V AC (50/60 Hz) UN 96/253
- Outdoor installation
- Adjustable
- Terminal for connection of PE protection cable
- Push-in terminals
- Wall installation
- Indoor installation
- Electrical service life at rated load AC1 100 - 10 cycles
- Adjustment of twilight switching threshold 5...1000 lx
- Adjusting switch-off delay time 10 s...20 min
- Contact material: standard AgSnO2
- Ambient temperature: -30...+50°C
- Degree of protection IP55
Lamp capacity:
- incandescent/halogen 1000W
- fluorescent with electronic ballast 500W
- fluorescent with power factor correction electromagnetic ballast 350W
- CFL 300W
- LED 230V 300W
- halogen or BT LED with electronic transformer 300W
- halogen or BT LED with electromagnetic transformer 500W
Advantages:
- 1 NO 10 A
- Terminal for connection of PE protective cable
- Output contact at mains potential
- Small dimensions
- Equipped with twilight sensor and delay time
- Adjustable switch-off delay time
- Can be used in any position for motion detection
- Wide detection angle
Data sheet
- Type:
- Sensors detectors
- Installation:
- Wall-mounted