Mini Relay Finder 2 exchanges 8A coil 230VAC alternating 405282300000

Finder
FIN 405282300000 8012823263267

Mini relay for printed circuit board and plug-in Finder Type 40.52, with the following features:

  • Nominal supply voltage (50/60 Hz) in AC 230V
  • Nominal voltage/ Max. switching voltage 250/400V AC
  • Contact configuration: 1 NO + 1 NC
  • Nominal power AC/DC/DC sens. VA (50 Hz)/W/W 1.2/0.65/0.5
  • Rated current/Max instantaneous current 8/15
  • Rated load on AC1:2000 VA
  • Rated load in AC15 (230 V AC) 750VA
  • Contact configuration 2 switches 8A
  • 5.0 mm pitch
  • Printed circuit board mounting or 95 series sockets

Compatible sockets: 9505SMA, 9505SPA.

Do you have questions about this product or did you not find what you were looking for? Ask us!
Mini Relay Finder 2 exchanges 8A coil 230VAC alternating 405282300000
€10.84
€10.84

€10.84
Tax included

€10.84

Buy it within and receive it from Tuesday, 12 August
Two-year warranty
Easy return within 14 days

Miniature Relay Type 40.52 is a plug-in relay for printed circuit board and socket Series 95. Equipped with 2 x 8 A change-over switch on printed circuit board, 5.0 mm pitch, it is a versatile device suitable for many applications such as control panels, control and distribution boards, electronic boards, door and gate openers and many more.

Features:

  • Finder Series
  • Single-phase motor capacity (230 V AC) kW 0.37
  • Breaking capacity in DC1: 30/110/220 V 8/0.6/0.25A
  • Minimum switching load mW (V/mA) 300 (5/5)
  • Standard contact material AgNi
  • Mechanical life span 10 - 10 cycles
  • Electrical life at rated load in AC1 100 - 10 cycles
  • Switching time: on/off 7/3 (12/4 sensitive) ms
  • Insulation between coil and contacts (1.2/50 µs) 6 (8 mm)
  • Dielectric strength between open contacts 1000V AC
  • Ambient temperature: -40°C...+85°C
  • Protection category RT II

Advantages:

  • Pin length 5.3 mm for socket or PCB mounting
  • Terminal length 3.5 mm for PCB mounting
  • Terminal length 5.3 mm for plug-in relays
  • DC coil (650 mW or 500 mW)
  • Variant with cadmium-free contacts
  • 8 mm, 6 kV (1.2/50µs) insulation between coil and contacts
  • Conformity to Glowe wire test according to EN 60335-1
  • Sockets series 95 for printed circuit board, or for 35 mm rail mounting (EN 60715) with Push-in, screw or spring terminals
  • EMC signalling and protection modules Series 99 and timer modules Type 86.30

Protection category

  • RT II - flushable (Standard)
  • RT III - flushable (Special version)

Data sheet

Type:
PCB Relays
Installation:
On sockets
Plug-in
Contact details of the manufacturer and the responsible person