Bticino memory module to restore automation in case of black-out F425
BTI F425
8012199529646
Bticino memory module, with the following features:
- Suitable to restore the status of the automation system (lights and shutters) in case of black-out
- 2 DIN modules lowered
- Voltage 27 Vdc
- Current In 0,005A
- Absorption 5 mA
- Operating temperature 0 - 40 °C
Bticino memory module to restore automation in case of black-out F425
€93.51
€93.51
Tax included
Tax included
Pay in installments with Klarna
Items Available: 3
The memorymodule connects to the system and stores the status of all devices. In this way, in the event of a blackout or brief mains interruptions (minimum 400 mS), it is able to restore the status of all the lamps controlled by the system when power returns. The reset operations take about 10 seconds. Only one memory module must be connected to the bus for each installed system (i.e. one for each ballast), except if two or more systems are connected using the SCS/SCS interface (F422) configured in physical expansion mode, in which case only one is needed for all the systems connected together. The device must be commissioned when the system is already installed and powered.
The multicolor led indicates the device status:
Off: device too far from the power supply unit
Fixed green: normal operation
Fixed orange: system not yet acquired
Fixed red: device exclusion phase
Flashing red: acquisition phase in progress
Flashing orange: incorrect or missing configuration
Characteristics:
- Bticino series
- Power supply from BUS SCS 27 Vdc from BUS
- Operating power supply with BUS SCS 18 - 27 Vdc
- Absorption 5 mA
- Operating temperature 0 - 40 °C
There are no reviews
Data sheet
- Type:
- Interface Modules
