Fracarro OPT-PDM-MINI fiber optic kit for DTT and SAT signals 270700

Fracarro
Fracarro
FRA 270700 8016978106127

Fracarro OPT-PDM-MINI 4-point fiber optic kit for fiber optic distribution of DTT and SAT 270700 signals, consisting of:

  • 1 OPT-MBJ three-input optical transmitter for distribution of band 3, UHF and a full IF-IF band signals on a single fiber;
  • 1 4-way miniaturized optical splitter;
  • 5 Mono modal fiber optic patch cords of 10 m each; and
  • 1 SC/APC adapter patch cord - Mini;
  • 4 Miniaturized passive optical receivers (can be placed in 503 boxes) with a wideband RF output for receiving TV+SAT signals distributed on a single fiber

The kit makes it possible to distribute DTT and SAT IF-IF signals over 4 TV points using the advantages of fiber optics: almost zero attenuation, total immunity to electrical interference, and the possibility of using channels at the limit of saturation.

Do you have questions about this product or did you not find what you were looking for? Ask us!
Fracarro OPT-PDM-MINI fiber optic kit for DTT and SAT signals 270700
€320.62
€320.62

€320.62
Tax included
Calculate shipping cost
Items Available: 2
Further availability of the manufacturer
€320.62

Buy it within and receive it from Thursday, 22 January
Two-year warranty
Easy return within 14 days
Purchase with tax breaks

Are you a professional ?

Request access to

Trustpilot

KIT component specifications:


OPT 3US TX optical transmitter code 270657:

Three-input OPT-MBJ optical transmitter for distribution of band 3, UHF and a full IF-IF band signals on a single fiber. Optical output level of 5dBm with laser, wavelength 1550nm. (dimensions 135x82x39mm):

  • OPT 3US TX: Up to 20dB of manageable optical attenuation (division ratio greater than 1:32 on P.O.N. distribution) if TX is used together with OPT-RX receiver
  • OPT T+S TX PLUS: Up to 24dB of manageable optical attenuation (division ratio greater than 1:64 on the P.O.N. distribution) if the TX is used together with the OPT-RX receiver
  • A.B.L.A. Technology: this exclusive FRACARRO system allows the correct optical level to be maintained by special independent electronic circuits, even if the RF input level of each input changes
  • Dedicated A.B.L.A. status LEDs
  • Separate amplification: the new OPT-MBJ optical transmitter works with "separate amplification" and independent management of input RF signals
  • Protective shell: OPT-MBJ optical transmitters and receivers are protected by an innovative protective bell made of flame-retardant ABS material (Class V0)
  • Optical output level stabilization even for high variations in RF input signal
  • Monitor output: RF output connector to monitor the RF signal without disconnecting the service from the distribution network
  • OPT RX: Immediate indications of compliance with correct working conditions. Separate LEDs for received optical power and RFP|P presence Dedicated LEDs for monitoring optical input level status and RF presence
  • Broadband TV / SAT
  • Suitable for mounting on standard DIN rail (with quick release)
  • Low power consumption
  • Power status LED
  • Quick and easy installation (Plug&Play)
  • High shielding against electromagnetic interference
  • Standard SC/APC connectors
  • RF inputs 3 (3, UHF, IF-IF)
  • RF outputs 1 (TEST)Optical output 1 SC/APC

SAT inputs:

  • MHz frequency band 950-2150
  • Type of connectors F Female
  • Reflection loss dB 8
  • Input level dBµV 60-85 @TP

TV input:

  • Frequency band MHz 174-230, 470-790
  • Type of connectors F Female
  • Reflection loss dB 8
  • Input level dBµV 60-85 @MUX

Test Output:

  • Frequency band MHz 174-230 / 470-790 / 950-2150
  • Type of connectors F Female
  • Test attenuation dBµV 59 (VHF), 70 (UHF, SAT)

Optical output:

  • SC/APC connector type
  • Wavelength 1550
  • Optical power dB 5
  • Optical reflection loss dBµV >30
  • Safety grade 1M

Main features:

  • Supply voltage Vac, Hz 230, 50-60
  • Power consumption W 5.5
  • Tele power supply mA, V 100, 12 (on UHF input)
  • Working temperature °C -10 - +55
  • CAG dynamics dB 25
  • Light indications dBµV Blue on / Signal in the correct A.B.L.A. range, tele power supply active
  • CEI EN 50083-2 EN60065 Regulatory Compliance
  • Dimensions mm 135x82x39


OPT-PDM-MINI passive optical receiver 270654:

Miniaturized passive optical receiver with one wideband RF output for receiving TV+SAT signals distributed over a single fiber. Optical input range of 0 to -6dBm; optical window of operation 1270-1610nm. (dimensions 47x33x15mm).

Features:

  • Standard MINI (LC) quick connectors.
  • Managed frequency band: 88-2350MHz
  • Optical input 1 MINI
  • RF Outputs 1 (TV + SAT)

Optical input:

  • MINI connector
  • Wavelength nm 1270-1610
  • Optical reflection loss dB -50
  • Maximum optical input power dB 10 (0 to -6 operation)

RF output:

  • MHz frequency band 88-2350
  • Connector type Type F Female
  • Reflection loss dB -7
  • Total output level dBµV 68@-6dBm; 80@0dBm
  • Digital Terrestrial output level dBµV 61 per Mux @0dBm
  • Satellite output level dBµV 55 per TP @0dBm

Main features:

  • Working temperature: 0+40°C
  • CEI EN 50083-2 EN60065 compliance.
  • Dimensions mm 47x33x15

Miniature optical splitter code 287211:

Suitable for indoor F.O. deployments where space is limited:

  • Inputs No. 1
  • Outputs No. 4
  • Type of connectors Type Mini
  • Wavelength nm 1290-1600
  • Insertion loss dB <7.8
  • Reflection loss dB >55
  • Isolation dB >45
  • Working temperature: 20+55°C
  • Dimensions mm 83x59x17

velocita di spedizione e buon imballaggio

Read all reviews

Data sheet

Type:
Glass Fiber Kit
Contact details of the manufacturer and the responsible person