Thanks to the free Wi-Fi, Smarther with Netatmo can be programmed and controlled by remote; it also allows you to view the temperature and the humidity measured in the environment. Locally are possible in the setting of the temperature level for the manual operation and the activation of the Boost mode, which allows forcing the power plant for a limited period of time (30, 60, or 90 minutes) regardless of the measured temperature and the programmed one.

It is also possible to set a different temperature in every room of the house for maximum comfort, as it is compatible with the thermostatic valves smart Netatmo.

The connected Smarther thermostat with Netatmo is switchable via screen readers, Google, Amazon, Alexa, and Apple Home Kit.

Installation: the boxes art.503E or art.500 (for art.500 to envisage fastening by means of bolts in the wall), Plasterboard, boxes art.PB503N and art. PB502N.

It is available in three colours: white (item code XW8002), sand (item code XM8002), and black (item code XG8002).

Features:

• Power Supply 110 ÷ 240 Vac, 50/60 Hz
• Absorption 2 W max
• The maximum section of the cables 1 x 1.5 mm2
• Operating temperature 5 ÷ 40°C
• Increments of 0.5 °C
• Output 1 contact in deviation potential-free 5(2)A.
• Drive type 1BU
• Pollution degree 2
• Rated impulsive voltage 4 kv.
• Wireless device complies with the standard 802.11 b/g/n, frequency 2.4 to 2.4835 GHz, transmission power <20 dBm.
• Security protocol is WPA/WPA2.