Abb Surge Protector OVR 40kA 1000 Vc OVRPV22401000TS

Abb
Abb
ABB OVRPV22401000TS 4053546050165

Abb OVR PV T2 surge protector with TS signaling contact with the following characteristics:

 

  • Rated impulse discharge current: 40 kA
  • Rated DC voltage: 1000 V
  • Maximum continuous DC voltage: 1000 V
  • Maximum PV (Photovoltaic) voltage: 1000 V
  • Protection level: 4.2 kV
  • Mounting method: 35mm DIN rail
  • Number of modules: 3
  • Degree of protection: IP20
Offer expires in
Do you have questions about this product or did you not find what you were looking for? Ask us!
Abb Surge Protector OVR 40kA 1000 Vc OVRPV22401000TS
€57.10
€55.38
€55.38

Lowest price in 30 days:
€57.10
Save 3%
€55.38
Tax included
Calculate shipping cost
Offer expires in
Items Available: 13
Further availability of the manufacturer
€55.38

Buy it within and receive it from Monday, 2 February
Two-year warranty
Easy return within 14 days
Purchase with tax breaks

Are you a professional ?

Request access to

Trustpilot

To protect PV installations more and more efficiently, with the launch of the new OVR PV T2 P (TS), ABB can now offer a surge protection set, complete with T1+T2 and T2 arresters to cover all situations found in most PV installations.

 

An item with removable cartridge, it is suitable for installation at the origin of the system, in intermediate switchboards and near terminal equipment, and protect against indirect lightning strikes. It is also equipped with end-of-life indicator. In general, they are suitable for installation as close as possible to the sensitive equipment to be protected. Type 3 allows protection according to the 1.2/50 curve with a very low residual voltage level.

 

The surge arrester is a tool that can be mounted inside the electrical panel, thus upstream of the house installation. Its use makes it possible to put the electrical system on which it is installed into protection.

 

The surge arrester will protect the entire system from power surges, surges and spikes that may come from the power line operator, or from atmospheric phenomena such as lightning. These power anomalies can cause serious damage to devices connected to outlets.

 

An electricity surge can cause a pc hardware to break, or short circuit the boards of smartphones, tablets, and home appliances. In the event that the flow of energy suddenly increases dramatically, human life may even be in danger due to electrocution.

 

To prevent this from happening, it is therefore advisable to install a surge arrester.


 

Surge arresters are divided into three classes:

 

In class 1 we find devices to be used in areas where adverse weather phenomena such as thunderstorms and lightning usually insist (for example, in the mountains). In this case, the arrester is mounted in the electrical panel and can withstand several surges without being damaged. Discharge occurs in 350 microseconds, so excess energy does not reach the system.

 

In class 2 are surge arresters that protect the system from surges and spikes that may be caused by maintenance work on the line by the operator.

 

In class 3, on the other hand, we find those devices that offer even greater protection: in this case, the surge arrester is installed directly at the electrical outlets in the home.


 

Characteristics:

  • Rated impulse discharge current: 40 kA
  • Rated DC voltage: 1000 V
  • Maximum continuous DC voltage: 1000 V
  • Maximum PV (Photovoltaic) voltage: 1000 V
  • Protection level: 4.2 kV
  • Protection level L-N: 4.2 kV
  • Mounting method: 35mm DIN rail
  • 3 modules
  • Max. Rigid conductor cross-section (rigid, semi-rigid) 35 mm²
  • Max. Flexible conductor section (capillary) 25 mm²
  • Signaling on luminaire: optical
  • Test class type 2
  • Degree of protection: IP20

There are no reviews

Data sheet

Voltage:
1000V
Modules:
3
Maximum current:
40KA
Version:
2
Model:
DC
Circuit Protections:
Surge protectors
Contact details of the manufacturer and the responsible person