Bticino 63A 4-pole 30mA differential circuit breaker block type F G43F63
Differential block (circuit breaker) Bticino, with the following characteristics:
- 3 modules
- 4 poles
- 63 amperes
- Differential current Idn 30mA
- Voltage 400Vac
- Differential type F
Frequently bought together
The differential blocks are mechanically designed to prevent a wrong coupling between the block and the circuit breaker: the power of the block must always be equal or greater than that of the circuit breaker. The lateral plastic clamp allows a quicker assembly of the block on the circuit breaker and a push button prevents possible interventions.
It is used to protect human health in case of earth fault (electrical leakage) or phase-to-earth electrocution, thus providing protection also against macro electrical shock, both direct and indirect, on exposed persons.
TheType F circuit breakers introduced by the recent product standard CEI EN 62423, guarantee effective protection against indirect contacts in the presence of loads equipped with single-phase frequency converters.
From a technical and performance point of view, they are positioned between type A and B residual current circuit breakers.
The residual current circuit breakerstype F are specially developed for protection against indirect contacts, when using appliances equipped with single-phase inverters such as, for example, heat pumps and washing machines. In the event of a ground fault in the inverter, they produce differential fault currents at varying frequencies, which AC and A type earth leakage circuit breakers cannot detect.
Features:
- Bticino Series
- Voltage 400Vac
- Current In 63A
- Differential current Idn 30mA
- Differential type F
- 3 modules
- 4 poles
- Degree of protection IP20
- Height 83mm
- Width 53,4 mm
- Depth 76 mm
- Maximum cable section 25/35mmq
Data sheet
- Voltage: 400VAC
- Modules: 3
- Poles: 4P
- RCD Type: F
- Differential current : 0.03A
- Amps: 63A
- Circuit Protections: Earth Leakage add-on Blocks

