Best seller
Inverter for Electric Pumps Dab ACTIVE DRIVER PLUS M/M 1.1 60149661
DAB 60149661
8059893079251
Inverter for Electric Pumps Dab ACTIVE DRIVER PLUS M/M 1.1 for control and command of hydraulic pumps find their natural Application in constant pressure pumping systems: domestic, industrial and agricultural:
- Line voltage: single-phase 1x230V
- Maximum motor current (A): 8.5
- Maximum motor power (kW): 1.1
- Vertical and horizontal installation
- Maximum pressure: 9 bar
- Suction diameter (DNA): 1 1/4" male
- Delivery diameter (DNM): 1 1/2" female
€405.22
€393.06
Lowest price in 30 days:
€405.22
Save 3%
Offer expires in
Items Available: 23
: 12
Advantages:
- Constant pressure
- Quiet operation
- Economy of operation
- Reduced water consumption
- Smaller footprint (expansion vessels not needed)
- Less maintenance
- Complete pump protection from abnormal condition
- Comfort due to constant pressure
- Energy saving due to inverter technology
- Quieter operation
- Compactness
- All built-in protections: dry running, amperometric, abnormal voltages, overtemperature and frost.
The Active Driver inverter is a command and control device for an electric pump, which includes connections to the hydraulic system, a pressure sensor, a flow sensor and an electronic frequency converter (inverter). LActive Driver is applied to the discharge of each electric pump regulates the rotational speed of the electric pump to which it is connected, so as to obtain constant pressure as the required water flow rate changes. The water flowing through the Active Driver Plus connections also helps to cool the heat produced by the internal electronic components.
TheActive Driver starts the pump at the first demand for water. The speed of the pump is adjusted (continuously) to the minimum value such that the user's demand is met. This provides significant energy savings. In a group, the startup of the second and third pumps occurs in cascade when the first pump reaches its maximum speed. The pressure is adjustable by the user via two keys + and - located on Active Driver (as a rule, all pumps are set to the same pressure value).
Pumps are stopped automatically in the following cases:
- Pump overcurrent
- Dry running
- Low supply voltage
- Exceeding a maximum pressure value (adjustable)
- Active Driver Plus electronic components overheating.
Features:
- Line voltage: single-phase 1x230V
- Electric pump voltage: single-phase 1x230V
- Power supply frequency 50 Hz - 60 Hz
- Maximum motor current (A): 8.5
- Maximum motor power (kW): 1.1
- Vertical and horizontal installation
- Maximum liquid temperature: 50°C
- Maximum operating temperature: 50°C
- Maximum pressure: 9 bar
- Pressure adjustment range: 1 to 9 bar
- Suction diameter (DNA): 1 1/4" male
- Delivery diameter (DNM): 1 1/2" female
- Degree of protection IP55
- Group communication interface: yes, one Active Driver Plus per pump
- Does not require a check valve
- Equipped with graphic display
- Can be used with surface, submersible 4" and 5" pumps with single-phase motor and motor absorption up to 8.5 A
- Possibility of remote control thanks to D.Connect service (D.Connect Box to be purchased separately)
Produit très fiable et très complet. Apporte vraiment une grande souplesse à l'utilisation d'une pompe
Great inverter.."…………………
matériel conforme a mes attentes mais pas encore mis en service
Ottimo inverter per pompe monofasi, consigliato!
prodotto come in descrizione.
Tempi di invio e ricezione rispettati
Régulateur de pression pour citerne , au top !
Correspond à mes attentes. Notice un peu complexe. Première mise en service pas évidente a comprendre.
Listenpreis 550€ ! Innovationen sind gut, aber hier wurde bei der Preisgestaltung deutlich übertrieben.
Pas encore testé, mais c'est du classique et le prix est très serré ! Livraison éclair en période de noël.
Data sheet
- Type: Inverter for electric Pumps
- Connections: 1-1/2 inches
1-1/4 inches