Siemens Residual Current Circuit Breaker 16A 1P+N 30MA F 10KA 2M 5SU13544KK16

Siemens
Siemens
SIE 5SU13544KK16 4001869460857

Siemens Sentron residual current circuit breaker:

 

  • 16A rated current
  • Poles: 1P+N
  • 30MA differential current
  • F differential type
  • Breaking capacity 10KA
  • K super resistant
  • 2 Modules
Do you have questions about this product or did you not find what you were looking for? Ask us!
Siemens Residual Current Circuit Breaker 16A 1P+N 30MA F 10KA 2M 5SU13544KK16
€60.33
€60.33

€60.33
Tax included
Items Available: 20
Further availability of the manufacturer
€60.33

Buy it within and receive it from Thursday, 21 August
Two-year warranty
Easy return within 14 days
Purchase with tax breaks

Are you a professional ?

Request access to

Trustpilot

The residual current circuit breaker is located next to the circuit breaker and integrates a magnetic protection to a thermal one, and in case of need it interrupts the electric current.

 

The residual current circuit breaker is, therefore, a system that combines the functions of the circuit breaker with magnetic and thermal features.


 

The residual current circuit breaker in the electrical system integrates three different protections:

  • the magnetic one for short circuits that can endanger an entire building with the danger of fire;
  • the thermal one for overloads in the power supply (e.g., more than one appliance in operation);
  • the residual current circuit breaker's own residual current circuit breaker, which protects the subject from a power leakage


     

F-type residual current circuit breakers are specially developed for protection against indirect contact when using consumer appliances with single-phase inverters such as, for example, heat pumps and washing machines. In the event of an inverter ground fault they produce differential fault currents at varying frequencies, which AC and A-type earth leakage circuit breakers cannot detect.


 

Features:

  • Super-strong product design K
  • Number of poles 2
  • Number of poles with protection 1
  • Pole execution 1 pole+N
  • Release characteristic class C
  • Mechanical service life (switching cycles) typ. 10 000
  • Overvoltage category III
  • Pollution degree 2

     

Voltage:

  • AC usage voltage type
  • insulation voltage (Ui) rated value 264 V
  • impulse withstand voltage rated value 4 000 V
  • impulse withstand current for (8/20) µs 3 kA
  • fault current per trip rated value 30 mA
  • type of fault current F

     

Supply voltage:

  • Supply voltage: with AC nominal value 230/240 V - for test device min. 195 V
  • frequency of use 50/60 Hz
  • frequency of supply voltage nominal value 50 Hz

     

General:

  • IP20 degree of protection, for installation in distribution board, with conductors connected
  • Power dissipation W max. 2.8 W
  • cross section of connectable conductor rigid wire min. 0.75 mm² - max. 35 mm²
  • section of conductor connectable multiwire min. 0.75 mm² - max. 35 mm²
  • conductor cross section pluggable flexible wire with conductor end preparation min. 0.75 mm² - max. 25 mm²
  • position of network cable optionally on top or bottom
  • Dimensions: height 90 mm - width 36 mm - depth 77 mm - recessed depth 70 mm - number of modular units of width 2 - mounting position as desired
  • net weight 271 g
  • weight with packaging 283 g

Envoi hyper, super produit à recommander absolument

Ancora non montato, ma mi fido del marchio Siemens_

Read all reviews

Data sheet

Modules:
2
Poles:
1P+N
Breaking capacity:
10KA
RCD Type:
F
Differential current :
0.03A
Amps:
16A
Circuit Protections:
RCBO
Contact details of the manufacturer and the responsible person