Bticino 25A 1P+N 30mA F 6KA 2M Differential Circuit Breaker GN8813F25
BTI GN8813F25
8005543702871
Bticino Differential Magnetothermal Circuit Breaker:
- Current In 25A
- Poles 1P+N
- Idn differential current 0.03A
- Tripping curve C
- Differential type F
- 2 Modules
- Interrupting capacity Icn 6kA
€193.99
Out of stock
Incoming
The thermal-magnetic circuit breaker is located next to the circuit breaker and integrates a magnetic protection to a thermal one, and in case of need it interrupts the electric current.
The thermal-magnetic circuit breaker is, therefore, a system that combines the functions of the circuit breaker with magnetic and thermal features.
The magneto-thermal differential switch in the electrical system integrates three different protections:
- the magnetic one for short circuits that can endanger an entire building with the danger of fire;
- the thermal one for overloads in the power supply (e.g., more than one appliance in operation);
- the differential one proper to the circuit breaker, which protects the subject from a power leakage
Curve C, trip threshold of 5 to 10 times In, for application of ohmic-inductive circuits with medium inrush currents. And widely used in domestic systems.
F-type Residual Current Circuit Breakers introduced by the recent product standard IEC EN 62423, provide effective protection against indirect contacts in the presence of loads equipped with single-phase frequency converters.
F-type residual current circuit breakers are specially developed for protection against indirect contacts when using consumer equipment equipped with single-phase inverters, such as heat pumps and washing machines. In the event of an inverter ground fault they produce differential fault currents at varying frequencies, which AC and A-type earth leakage circuit breakers cannot detect.
Characteristics:
- Reference Standard IEC EN 61009-1
- Voltage 230 Vac
- Degree of protection IP20
- Height 83mm
- Width 35.6mm
- Depth 76mm
- Maximum cable cross section 25/35mmq
There are no reviews
Data sheet
- Voltage: 230VAC
- Modules: 2
- Poles: 1P+N
- Curve: C
- Breaking capacity: 6KA
- RCD Type: F
- Differential current : 0.03A
- Amps: 25A
- Circuit Protections: RCBO