Mareco Saturno diffuser with E27 connection Black 1033101N

Mareco Luce
MAO 100-1033101N 8033706354209

Mareco Saturno diffuser:

  • Fixture with E27 socket for use on Ø60mm poles with max. 3mm folder
  • Translucent PMMA (acrylic) diffuser that is UV unalterable
  • PC (polycarbonate) pole attachment colored black paste
  • Maximum lamp size Ø60xL110mm (lamp not included)
Do you have questions about this product or did you not find what you were looking for? Ask us!
Mareco Saturno diffuser with E27 connection Black 1033101N
€45.16
€45.16

€45.16
Tax included
Calculate shipping cost

€45.16

Buy it within and receive it from Monday, 22 December
Two-year warranty
Easy return within 14 days

Features:

  • Outdoor residential for use on Ø60mm overhead poles (IP65), for straight mounting
  • Body and cap made of black paste-colored PC (polycarbonate)
  • Diffuser with screw coupling, made of translucent PMMA (acrylic) with etched effect, connected to the lamp holder compartment by black polycarbonate fitting and sealed with pure neutral silicone adhesive, anti-mold low elastic modulus with excellent resistance to aging, weathering and UV rays
  • Black PC (polycarbonate) lamp holder compartment
  • AISI 301 harmonic steel pole retaining spring
  • Polyester powder coating with special pre-treatment for outdoor use (Phosphochromation) in order to ensure high resistance to atmospheric agents
  • Silicone gasket
  • A2 stainless steel hardware
  • Fixed-position fluorescent light source
  • Rotosymmetrical illuminance
  • Lamp socket E27 max 10W FBT, mains voltage 220-240V 50-60Hz
  • Maximum lamp size Ø60xL110mm
  • Equipped with PG9 plastic cable gland with osmotic valve for air leakage (limits overpressure) and humidity
  • Connection to the power supply line can be made via H05RN-F 2x0.75mmq cable preconnected at the outlet of the luminaire (35cm)
  • Fixing by harmonic steel expansion spring
  • Routine maintenance by unscrewing the diffuser with screw connection (E27)
  • Routine and extraordinary maintenance on Led wiring not required
  • IP68 "T"-shaped branch terminal block cannot be housed inside the Ø60mm pole
  • Circular section diffuser Ø200mm
  • Product dimensions 320x200mm diameter

Mechanical properties silicone, cured 7 days at 22°C and 50% relative humidity:

  • Hardness, Shore A 37
  • Tensile strength MPa 2.5
  • Elongation at break %680

Data sheet

Type:
Light diffusers and floor lamps
Contact details of the manufacturer and the responsible person