Fischer 1K manual polyurethane foam 750 ml 00009285
FIS 00009285
8001132092859
Fischer polyurethane foam:
- It is a single-component polyurethane product, CFC-free, self-extruding, ready to use
- Polyurethane foam contains propellants that are not harmful to the ozone layer
- Color Straw yellow
- Drying time Dust free after 20-25 min. (+20°C 65% Ur)
- Hardening speed 1.5 h per 30 mm of bead (+20°C 65% Ur)
- Developed volume up to 45 litres.
€5.31
€5.31
Tax included
Tax included
Items Available: 110
: 49
Manual Universal Polyurethane Foam for construction is a one-component, CFC-free, self-extruding, ready-to-use polyurethane product. The polyurethane foam contains propellants that are not harmful to the ozone layer. Colour Straw yellow Drying time Dust dry after 20-25 min. (+20°C 65% RH) . Hardening speed 1,5 h for 30 mm of bead (+20°C 65% Ur) Shrinkage None Post-expansion None, volume developed up to 45 litres.
PRODUCT CHARACTERISTICS:
- Ready to use
- Self-extruding manual
- Suitable for joining
- Filling and insulating
- Excellent adhesion to most substrates (except PE, PP and Teflon)
- Excellent volume yield
- Excellent stability
- No shrinkage
- High insulating capacity
- Two sizes available: 500 ml and 750 ml
APPLICATION:
- Sealing to achieve good acoustic and thermal insulation
- Fixing insulation panels such as polystyrene, extruded polystyrene, cork, etc.
- Fixing and reinforcing plasterboard panels, partition walls, false ceilings, etc.
- Sealing of penetration holes
- Sealing of manhole rings and covers
WAY OF APPLICATION:
- The substrate must be clean, free of dust, oil and grease.
- To obtain a perfect polymerisation and better adhesion it is necessary to moisten the substrate and the applied foam.
- The best foam yield results will be obtained with canisters at a temperature of approximately +20°C.
- Shake the can well before use (20 to 30 times).
- Dose the foam using the nozzle
- Apply from top to bottom
Data sheet
- Type: Foams
