The connected actuator allows to drive a load through a button connected between terminal L and input P2. The device can be controlled with two different radio standards (exclusive of each other): Bluetooth mesh (default) or Zigbee (settable via View Wireless app).

The Bluetooth mesh network implies the presence of the Gateway 20597 - 19597 - 14597 while the dialogue via Zigbee requires a Zigbee gateway (e.g. Alexa Echo Plus or Echo Show).

• Configuration from App View Wireless for Bluetooth technology system and Amazon App for Zigbee technology
• Compatible with Alexa, Google Home and IFTTT, via the appropriate Zigbee gateway or hub
• Shape encourages maximum installation flexibility (back of house, junction boxes, etc.)
• When driven directly from the controls without battery, no wiring with electromechanical buttons is required.
  
  

Features:

• Rated supply voltage: 100-240 V~, 50/60 Hz
• Power dissipation: 0.55 W
• Transmitted RF power: < 100mW (20dBm)
• Frequency Range: 2400-2483.5MHz
• Terminals: 2 terminals (L and N) for line and neutral; 1 terminal (P1) to control the device; 1 terminal (P2) to recall scenario (in Bluetooth technology) and to control the device; 1 terminal (1) for connection to the load (in Zigbee technology)
• The button connected to P1 is used both to control the load and as configuration button
• RGB LED indicating the configuration status (flashing blue)
• In Bluetooth technology mode, up to 2 radio devices (art. 03925) can be associated with the device, allowing the control of the actuator or the activation of a scenario
• Operating temperature: -10 ÷ +40 °C (for indoor use)
• Degree of protection: IP20
• Controlled by App View, voice assistant Alexa, Google, Siri and Homekit for Bluetooth technology system
• Controlled directly by Alexa voice assistant and Amazon Alexa app for Zigbee technology.