• Video entry door station for wall mounting, Quadra series
• Die-cast aluminium front panel, wide-angle colour camera and single LED for night lighting
• Mechanical keys with possibility of setting from 1 to 4 call keys via DIP-switch
• LED signalling for call sent, door opener activated, speech activated and system busy
• Loudspeaker volume and speech balance adjustment
• Power supply from bus line
• Dimensions: 95x195x28 mm.

• Wall monitor with 4.3" / 16:9 colour screen and handset.
• Brightness and colour can be adjusted and the ringer volume can be customised by choosing from a variety of melodies.
• As standard it is equipped with 4 soft touch buttons for managing the door opener, the auto switch-on, the switchboard call and the privacy function and with LEDs for signalling door status.
• Door call management as standard
• Possibility of adding 4 additional buttons with accessory art. 6733W
• Complete with 2 dip-switches with 8 positions for user code and button programming
• Including fixing bracket for wall or civil series box and upright shunt terminal art. 1214/2C
• The monitor can be used only on 2-wire Simplebus2 systems.
• Dimensions (L x H x D): 175x160x22mm.

VIDEO KIT POWER SUPPLY UNIT. S2 1209

• 33 VDC power supply for 2-wire kit to directly connect the door unit and apartment station.
• Equipped with overload and short-circuit protection
• Input voltage 110-240 VAC
• Dimensions: 106 x 62 x 89 mm (6 DIN modules).

SIMPLEBUS2 TERMINATION TERMINAL 1216

• Line termination terminal
• Supplied with the mixer (4 pcs)
• To be mounted at the end of the riser, according to the indications in the technical documentation, to optimise signal distribution.

• Line shunt clamp. The terminal is to be connected to the upright to branch off towards brackets or intercoms.