Chint Residual Current Circuit Breaker NB1L2 10A 1P+N 6KA 30MA A 2M 203017
CHT 203017
6925808308131
Chint NB1L2 Residual Current Circuit Breaker, reliability, compactness and safety for civil and industrial use, with the following features:
-
Number of poles: 1P+N
-
Rated current: 10 Amps
-
Differential type: A (sensitive to alternating current and pulsating unidirectional)
-
Residual differential current: 30 mA
-
Magnetothermal curve: C (for mixed loads, motors and household systems)
-
Breaking capacity: 6 kA
-
Width: 2 DIN modules
-
Rated voltage: 230 V AC
-
Degree of protection: IP20
€49.15
Out of stock
Incoming
Further Chint RCBO combinations:
Chint circuit breaker complete protection in one device
Chint's NB1L2 differential circuit breaker combines three fundamental protections in a single device: against overloads, short circuits and current leakage. This makes it indispensable in any electrical system, whether civil, tertiary or industrial, where safety and continuity of operation are priorities.
Guaranteed safety with type A technology
Type A differential protection acts not only on alternating sinusoidal currents, but also on pulsating unidirectional currents, such as those generated by some electronic devices. This enables broader and more modern protection adapted to current loads such as PCs, washing machines, air conditioners, switching power supplies and more.
Compact design, quick assembly
The switch comes in a 2 DIN module format, easily installed on any standard electrical panel. It is connected quickly and securely with screw terminals. The device is 1P+N, so it protects the phase with safe neutral interruption.
Recommended use applications
-
Civil and residential electrical panels
-
Industrial and tertiary installations
-
Socket and appliance protection
-
Technical rooms, offices, commercial environments
-
Home automation systems or automations
Technical characteristics residual current circuit breaker NB1L2
Electrical Data
| Series | NB1L2 |
|---|---|
| Rated current | 10 A |
| Tripping curve | C |
| Differential type | A (AC + pulsating unidirectional currents) |
| Differential current | 30 mA |
| Number of poles | 1P+N |
| Rated voltage | 230V AC |
| Breaking capacity | 6 kA |
Installation
| DIN modules | 2 |
|---|---|
| Application | Overload, short circuit and direct contact protection |
There are no reviews
Data sheet
- Voltage: 230VAC
- Modules: 2
- Poles: 1P+N
- Curve: C
- Breaking capacity: 6KA
- RCD Type: A
- Differential current : 0.03A
- Amps: 10A
- Circuit Protections: RCBO