KIT Components Specifications:

 

Huawei Router model B311-221 4G WiFi LTE 150Mbps Gigabit Port white color:

• With built-in SIM card slot and GE LAN/WAN port (SIM card not included), the Huawei 4G Router can be used as a wireless broadband modem or modem router for ADSL connection
• - With fast 4G and up to 150Mbps to connect to the internet, the connection via WiFi allows you to watch all movies in ultra HD without waiting time
• Allows you to connect up to 32 Wi-Fi enabled devices simultaneously, including laptops, tablets, smartphones and gaming consoles
• The GE LAN/WAN RJ45 port provides stable data service for PCs, OTT set-top boxes, etc., while the phone port allows you to enjoy voice services
• Its fine and elegant design will fit excellently with your home decor.

Features:

• dC power supply type
• ADSL
• Ethernet LAN transfer rate10,100,1000 MB/s
• Cabling Technology10/100/1000Base-T(X)
• Ethernet LAN Connection Yes
• Gigabit Ethernet LAN Interface Type
• WAN Ethernet Yes
• Without Memory Card Slot
• Without USB Port
• Antenna Type Internal & External
• 1 Ethernet LAN Port (RJ-45)
• Housing Material Plastic
• Security Algorithms Supported WPA2-PSK
• On/Off Switch Yes
• Product Colour White
• Product Type Desktop router
• WLAN data transfer rate (max)300 MB/s
• Supported network protocols DHCP, ICMP, IPv6, L2TP, NAT, PPTP
• LED indicators LAN, Power, status, WLAN
• Processor Standard Wi-Fi802.11b,802.11g,Wi-Fi 4 (802.11n) - Standard 4GLTE
• Reset button
• Wi-Fi standard Wi-Fi 4 (802.11n)
• Wi-Fi Band Single-band (2.4 GHz)
• Security WPS Push Button
• Connection Type WANRJ-45
• SIM Card Slot
• 3G/4G compatible USB modem
• Wi-Fi Standard 802.11b,802.11g,Wi-Fi 4 (802.11n)
• Wi-Fi Band Single-band (2.4 GHz)
• WLAN data transfer rate (max)300 MB/s
• Wi-Fi standard Wi-Fi 4 (802.11n)
• Antenna connector type SMA
• Mobile networks: 3G - 4G - 4GLTE standard
  
   

Bticino wifi Smarter2 wall-mounted thermostat white (XW8002W):

• Thanks to its Wi-Fi connection, Smarther with Netatmo can be programmed and controlled remotely.
• It also allows you to display the temperature and humidity measured in the room.
• Locally, it is possible to set the temperature level for manual operation and to activate the Boost mode, which allows you to force the system to turn on for a limited period (30, 60 or 90 minutes) regardless of the measured and programmed temperature.
• You can also set a different temperature in each room of the house for maximum comfort, as it is compatible with Netatmo's smart thermostatic valves
• The Smarther with Netatmo connected thermostat is controllable via Google voice assistants, Amazon Alexa and Apple Home Kit
• Installation: on the wall, using screws and plugs suitable for the characteristics of the installation surface (masonry, plasterboard, tiles, etc.). It is only available in white color.
  
   

Features:

• Power supply 110 ÷ 240 Vac, 50/60 Hz
• Absorption 2 W max
• Maximum cable cross-section 1 x 1.5 mm2
• Operating temperature 5 ÷ 40°C
• Increases of 0,5 °C
• Output 1 potential free deviation contact 5(2)A
• Drive type 1BU
• Pollution degree 2
• Rated impulse voltage 4kV
• Wireless device conforming to standard 802.11b/g/n, frequency 2.4 ÷ 2.4835 GHz, transmission power <20 dBm
• Security protocol WPA/WPA2.