Kit component specifications:


 

Smarther 2 connected thermostat with Netatmo white XW8002:

 

In conjunction with the Home + Control APP, it enables precise and timely regulation and monitoring of the temperature within rooms; all programming and most functions are done easily and intuitively using the APP. Thanks to the Wi-Fi connection it has, Smarther 2 with Netatmo can be programmed and controlled remotely; it also allows you to view the temperature and humidity measured in the room.

 

Locally, it is possible to set the temperature level for manual operation and to activate the Boost mode, which allows the system to be forced on for a limited period (30, 60 or 90 minutes) regardless of the measured and programmed temperature.

 

You can also set a different temperature in each room of the house for maximum comfort, as it is compatible with Netatmo's smart thermostatic valves. The Smarther 2 with Netatmo connected thermostat can be controlled via Google voice assistants, Amazon Alexa and Apple Home Kit.


 

Main features:

• Energy Class 4
• Power supply 110 ÷ 240 Vac, 50/60 Hz
• Power consumption 2 W max
• Maximum cable cross-section 1 x 1.5 mm2
• Operating temperature 5 ÷ 40°C
• 0.5°C increments
• Output 1 potential-free deviation contact 5(2)A
• Drive type 1BU
• Pollution degree 2
• Rated impulse voltage 4kV
• Wireless device complying with 802.11b/g/n standard, frequency 2.4 ÷ 2.4835 GHz, transmission power < 20 dBm. WPA/WPA2 security protocol
  
   

Installation from:

• Recessed, on boxes art.503E or art.500 (for art.500 provide fixing by plugs in the wall)
• Plasterboard, on boxes art.PB503N and art. PB502N.
  
  
   

Gateway to create a connected installation in the house NT4510C:

• Gateway to create a connected installation of the house. Can be used to control lights, blinds and electrical equipment connected to connected outlets using smartphone and Home + Control app, voice assistants, general control at the entrance of the house. Supplied with the LN4570CWI flush-mounted wireless Enter&Exit scenario control required for the pairing procedure of all connected devices. Power supply 110-230 Va.c. - 2 modules
  
   

NT4003C connected diverter:

• Allows lights to be controlled locally or remotely. It installs like a traditional diverter and is compatible with all loads up to 250 W power. It features a blue LED, configurable from theAPP HOME + CONTROL, for location and load status functionality. It can be associated with one or more wireless controls. Caution: connection to neutral is required. Power supply 110-230 Va.c. - 1 module
  
   

Connected lights relay 3584C:

• Connected lights relay. Allows lights to be controlled locally or remotely. It is compatible with all loads with a maximum power rating of 300 W. Can be connected to one or more traditional pushbuttons or associated with one or more wireless controls. It installs like a traditional relay in the flush-mounted box (behind the button) or in junction boxes. Caution: connection to neutral is required. Power supply 110-230 Va.c
  
   

NT4411C connected switch/dimmer:

• Connected switch/dimmer. Allows lights to be controlled locally or remotely via Home+Control APP. It installs like a traditional switch and is compatible with incandescent or LED (dimmable) loads, capacitive type, with max. 150W power at 230Vac. It is equipped with a blue LED for location and load status functions, configurable by APP. It can be connected to one or more traditional buttons or associated with one or more wireless controls. Please note: the vary light function is activated only by APP and neutral connection is required. Power supply 110-230 Va.c. - 1 module.
  
   

NT4531C connected socket module:

• Connected socket module. Connected to a power outlet, it allows remote control of electrical devices and monitoring their consumption (instantaneous, daily, monthly). You can also receive notifications in case of abnormal consumption. Compatible with any electrical device with power ratings up to 3680W with 16A absorption (protected against overloading). Features a blue LED, configurable from the HOME + CONTROL APP, for location and load status features. Power supply 100-230 Va.c. - 1 module.
  '

DIN smart load management module:

• DIN smart load management module to monitor consumption of the entire electrical system, power/discharge loads and set scenarios with priority and non-priority loads. When the maximum power stipulated in the user's contract is reached, non-priority loads will be temporarily de-energized to avoid possible and annoying blackouts. A toroid for input current measurement is provided. Power supply 100-240 Va.c. - 1 DIN module.