Safety shoes Beta LOW Size 44 suede perforated with reinforcement and anti-abrasion in the area of the toe cap, outsole, Polyurethane bidensità, toe cap made of polymeric Material, resistance 200 Joules, Anti-drilling Fiber composite with ceramic treatments, Anatomically shaped footbed in carbon, Follows the rules of safety.

The following safety rules:

- S1P (The work shoes S1P are the most widespread on the Italian market as they are suitable for all activities in dry environments where workers run a high risk of crushing of the foot and sliding caused by oils and hydrocarbons. In addition, this type of shoes is also ideal if there were splinters and nails as they are equipped with a special sockliner composite toe cap composite toe. The outsole is not only slip-resistant but also acts as a shock absorber to reduce the energy transmitted from the shock to the heel which may cause damage to health)

- EN ISO 20345 (safety Footwear with toecap resistant to 200 joules. The toe cap must withstand without rupture to the fall of a weight of about 20 kg from 1 m height).

The optional SRC is composed of two rules, the SRA AND SRB. This set of rules establish the strength of the sole to slipping. The standard SRA provides that the resistance to sliding of the sole to be tested on a ceramic surface is covered with water and detergent, while the standard child RESTRAINT systems involves the testing of resistance on a steel surface coated with glycerin. The under SRC includes both methods.