Kit intrusion Lynx ISCHIA comprising:

- 1 piece Central alarm Gold with 64 wireless zones and 5 zones, the rows can be extended to 30 Each expansion module auxiliary has 5 inputs. In the central board there are 4 Open Collector outputs programmable, 1 fault and 1 of the state system, in addition to a relay with double exchange for the alarm. Compatible with all devices radio GOLD 869, working on frequency 868 and 869 MHz, such as presence detectors for indoor and outdoor use, magnetic contacts, contact wire for roller shutters and self-powered sirens. The communication protocol is completely bidirectional, and digital, and operates on five different channels of frequency from 868,00 to 869,65 MHz. The transmission distance between central and peripheral devices and to 1.5 km in free air. The safety and reliability of the communication is guaranteed by the system, FH (Frequency Hopping), the TDMA (Time Division Multiple Access) and dallAES (Advanced Encryption Standard). The system also has the function DES (Detection Event Stored): in case of communication failure between the detector and the central unit (e.g. to attempts to jamming or environmental noise), the detector holds in memory any alarm, and communicates them to the central to the re-establishment of communications. The continuous dialogue between the central and peripheral also eliminates the risk related to the attempts of the frequency disturbance (jammer). The central 869 and equipped with SLEEP function: this option allows you to place the radio devices in a dormant state (in which it cannot transmit and detect) low consumption in case the control panel is removed or switched off for maintenance. The system is also able to detect and report interference when the noise level and high enough to degrade the correct transmission between the devices. The high battery life of the devices and guaranteed by a sophisticated software which modulates the power output of the transmissions between the central and peripheral as a function of the distance between them. Since the system is a two-way the last generation of devices know the state of the system: if switched off the peripheral devices are in a standby state, with the exception of the function of tamper protection, helping also with this function, the saving of the consumption of the batteries; if the system is inserted, the detector is not inhibited after the first recording, but continue to detect the possible intruder, becoming in fact as safe as a system to spin. By adding the GSM card inside, and can be a complete g e s t i o n and at a distance, via SMS , via APP Lynx GSM . The system programming can be performed with the appropriate software, art. 9547-GOLD-SOFT from your computer. The IP tab WiFi art. 9565-GOLD-SOFT-WIFI, will manage the central wirelessly over IP using GOLDSoft. The central GOLD-MST, and conform to the industry standards EN 50131-1, grade 2. Housed in a metal box that can hold a battery up to 18 Ah (not supplied). The switching power supply that equips and 3 A. For flexibility of use the panel is supplied without control devices. Size: 400 x 250 x 100 mm. (code 9571);

- 1 piece Card GSM module central GOLD Series programmer Card GSM telephone to be placed inside of the central GOLD Series 869, complete TTS (Text To Speech), voice messages on the alarm state, and the responder, address of 16 numbers, the remaining credit of the SIM through SMS. (code 9512);

- 1-piece Keyboard the row TOUCH GOLD Series 869 Keyboard row with touch display LCD can be connected via the BUS to all of the central GOLD Series 869. It is equipped with a display of 4.3 " with resistive touch screen that provides the user with a better interactivity compared to traditional keyboards. The modern design and interface, eye-catching graphics make it the ideal device for installation in domestic environments. The main screen allows you to quickly view the status of the plant, the date, time, and ambient temperature. It is equipped with three customizable buttons for quick insertion of the combinations of the programs you use the most. Through the menu of management of inputs allows for a fast consultation of their state, and may be excluded. The Touch Keyboard is equipped with function Emergency Lamp, which if enabled, the display lights up in case of absence of mains voltage. It is designed to be mounted on a 503 box so as to facilitate the mounting. It is a keyboard user, and therefore enables management of the plant, but not its configuration. Color white. (code 9541).